Trailer Hitch, Brake Controller, and Wiring Recommendation for 2017 Jeep Patriot

Published 12/22/2017

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(343)

$206.73

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3534)

$118.67

Question:

i won't have to splice into my wiring will i?

asked by: Steve

Expert Reply:

First you'll want to start with the Draw Tite Hitch part # 75712 which is a confirmed fit for your 2017 Jeep Patriot and would work well. I attached an install video for this for you to check out too. It's a 2 inch hitch which will have higher towing capacities.

You will need to start with a 4-way (if you do not have one). For that you would want the # 118552.

From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.

expert reply by: Jameson C

Steve

12/22/2017

i won't have to splice into my wiring will i?

Jameson C.

12/22/2017

The 4-way install part # 118552 does not require any splicing. Basically it installs by plugging inline with the taillight harnesses that your vehicle has. The # ETBC7 does require some splicing though. But if you follow the install video I attached below you'll be walked right through the process.