How Much Power do Optronics Trailer Lights, # TLL9RK, Draw
Updated 06/15/2011 | Published 06/12/2011
Question:
Hi Can you tell me the current draw for the LEDs lights for this product? Break, turn current? Thanks
asked by: Jim
Expert Reply:
On the Optronics Trailer Lights, # TLL9RK, there are 2 different tail light assemblies. The driver side which includes the license plate light, draws a max of 0.254 amps at 12.8 volts (brake/turn lights) and the running lights draw 0.112 amps at 12.8 volts.
The passenger side light is a little different since it does not power a license plate light. It draws a max of 0.259 amps at 12.8 volts (brake/turn) and 0.062 amps at 12.8 volts for the running lights.
Product Page this Question was Asked From
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Reflector
- Stop
- Tail
- Turn
- Square
- Surface Mount
- Submersible Lights
- LED Light
- 5L x 5W Inch
- Red
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: Does etrailer Trailer Hitch Receiver for 2018 Dodge Journey Include Fishwire
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Maintenance Schedule
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Best Wheel and Tire for Trailer to Replace 4.80-12
- Q&A: Adjusting the B&W Biker Bar Base for Height of Road King Frame
- Q&A: Biker Bar For The B&W Motorcycle Tie-Down System for Trailers
- Q&A: What is the Max Tongue Weight of the B&W Digital Tongue Weight Scale w/ LED Screen
- Q&A: Lighting Requirements for Trailer that is over 80 inches in Width
- Q&A: How Does the Pipe Attach to the Cam Lock Assembly on Polar 658-002?