Does Lippert Power Stabilizer Jack # LC298707 Replace 369777

Question

Question:

Will your PN LC298707 be a direct replacement for my LCI 369777 power stabilizer jack? Does the jack mount to a spacer block on the 2018 Shockwave 25RQMX and if so does the jack come with it or is that a separate part?

asked by: Scott B

0

Expert Reply:

Yes, we have checked with Lippert and Power Stabilizer Jack # LC298707 is the replacement for 369777. The jack does not come with any spacer blocks.

expert reply by: Michael H

0

Answer 1

According to Fastway, the 3/4 inch plated bolts they use are grade 5, but you'll want to use 3/4 inch conical toothed washers and lock nuts. The lock nuts can be found locally, but not the washers and Fastway won't honor the warranty if…

view full answer...

Answer 2

Yes, the Lippert Components Power Stabilizer Jack #LC298707 that you referenced is what you will want to replace your jack with the part number 369777 (as pictured) with. My contact at Lippert Components verified this.

view full answer...

Answer 3

According to my Lippert representative, the #LC298707 is the direct replacement for the 369777 you referred to. I've linked to an install video that you might find helpful.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 6

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 7

Hey Lee, welcome back! The etrailer 4-Leaf Double-Eye Spring #e22YR is a good choice for your 3,500 lb Dexter axles as long as the length matches your original springs. These measure 26" from eye to eye when unloaded and have a 28" flat…

view full answer...

Answer 8

Thanks for letting us help Michael. For the leaf springs, I'd recommend the 4-Leaf Double-Eye Spring #e54SR. This is a 25-1/4-inch double-eye spring that's a great fit for your 3,500-lb axle. If you haven't already planned on it, I'd…

view full answer...

Does Lippert Power Stabilizer Jack # LC298707 Replace 369777

Continue Researching