Hardware for Fulton 3x3 Fold-Away Coupler

Question

Question:

Fulton 3x3 fold away. Im replacing the front tube on my trailer and want to use new bolts where can I get the 16 nuts and bolts

asked by: Kevin

0

Expert Reply:

The hardware would be available with the Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue - Bolt On # FHDPB330301. This kit does come with the tongue, as well as the mounting hardware, as that is not available separately.

I've added a link to a video review of this product for you to take a look at.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Hello Jacques, thanks for reaching out. With the SwingKing Bolt-On Swing Tongue Kit #TD28FR, you really should not see much noticeable play once everything is installed and torqued correctly. It is designed to fit a 3" wide tongue, so as long as…

view full answer...

Answer 2

Hey Brandon, The specific weigh capacity of this swing away tongue#TD28FR is determined by how long you make it. I have attached the chart breakdown of the different lengths and capacities for the 3 x 3 tongue like #TD28FR. It can range from…

view full answer...

Answer 3

You would need to install the Fulton Fold-Away Coupler Hinge Kit #FHDPB330301 on the smaller 3 inch by 3 inch section of the tongue on the coupler. It would fit on your trailer that has a length there of 7-3/4 inches and would work well. It would add…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 6

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 9

Hi Cody! We do have a couple alternatives that will work the same, but the Fulton FHDPB330301 swing away kit is not currently available. It may be at some point in the future, but with their parent company (First Brands) having "issues"…

view full answer...

Answer 10

Hey Colin! I reached out to Swing King and they said the trailer tongue will slide in approximately 3-1/2" on either side on the #TD88FR. With an overall length of 18-1/4" you're adding about 11-1/4" to the tongue. I went ahead and…

view full answer...

Answer 11

I checked with Fulton and there's no difference other than the part numbers for their HDPB330101 and our item #FHDPB330301. This is common when they're sold by different vendors. They both fit a 3" x 3" trailer coupler, have a zinc…

view full answer...

Hardware for Fulton 3x3 Fold-Away Coupler

Featured Help Information

Miscellaneous Media

Continue Researching