Dimension on the Bulldog 2-Speed Trailer Jack # BD183816

Updated 05/19/2011 | Published 05/16/2011

Question:

Hi, I am thinking of using this particular jack for our engineering project. Would you be able to give me some basic information so I can see if packaging this jack is a doable thing. 1. The max dimensions of the outer square tube ? 2. The maximum length of the outer square tube ? 3. The max dimensions of the inner square tube ? 4. For further assembly purposes, is the inner square tube separable from the outer square tube ? Thanks !

asked by: Roger E

Expert Reply:

On the Bulldog 2-Speed Trailer Jack, part # BD183816 the overall width dimension of the outer square tube is 4 inches.

The maximum length of the outer square tube is 25.13 inches

The overall width dimension of the inner square tube is 3-1/2 inches.

The inner tube can be removed from the outer tube, but you would have to take apart everything in the outer tube to be able to remove the inner tube. The drop leg at the bottom can just be removed from the inner tube by pulling the plunger pin out.

expert reply by: Jeff D