1. Camper Jacks
  2. Bulldog
  3. Landing Gear
  4. 10000 lbs
  5. Weld-On
  6. Sidewind Jack
Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Planetary - 26" Lift - 10,000 lbs

Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Planetary - 26" Lift - 10,000 lbs

Item # BD183816
lowest price pledge
Retail:$523.86
Our Price: $318.02
You Save: $205.84
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 72 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

With a front-facing plunger pin and 29-1/2" retracted height, this jack offers maximum lifting power in low gear and the fastest cranking in its weight class in high gear. No need to reposition the crank to switch gears. Crank sold separately. Call 800-298-8924 to order Bulldog camper jacks part number BD183816 or order online at etrailer.com. Free expert support on all Bulldog products. Guaranteed Lowest Price and Fastest Shipping for Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Planetary - 26" Lift - 10,000 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (12)
  • Q & A (26)
  • Photos
  • Why etrailer?

Bulldog Camper Jacks - BD183816

  • Landing Gear
  • 10000 lbs
  • Weld-On
  • Sidewind Jack
  • Bulldog
  • 26 Inch Lift
  • 1 Jack

With a front-facing plunger pin and 29-1/2" retracted height, this jack offers maximum lifting power in low gear and the fastest cranking in its weight class in high gear. No need to reposition the crank to switch gears. Crank sold separately.


Features:

  • 2-Speed design makes cranking faster and easier
    • Low gear: full lifting power offers smooth and easy ratio of 1" every 27 turns
    • High gear: ultimate speed with 1" for every 9 turns - fastest in the weight class
  • Ideal for standard agricultural, construction and industrial trailer applications
  • Planetary gearbox makes switching gears fast and easy
    • No need to reposition crank
    • Eliminates need for spacers by fitting within the jack's width profile
  • Smooth and simple operation
  • Specially engineered alloys provide strength and stability
  • Painted surfaces include both inner and outer tubes and drop leg
  • Drop leg with spring return increases overall extension for maximum adjustability
    • Plunger pin positioned to the front
  • Standard footplate included
  • Sidewind crank not included
    • Shaft for crank handle has diameter of 1"


Specs:

  • Bracket height:
    • 29-1/2" Retracted
    • 42" Extended
  • Total lift: 26"
    • Travel: 12-1/2"
    • Drop leg: 13-1/2"
  • Tubing width: 4"
  • Lift capacity: 10,000 lbs
  • Static capacity: 12,000 lbs
  • Limited 5-year warranty


183816 Bulldog 2-Speed Square Jack with Spring Return Drop Leg, Planetary Gearbox, 12-1/2" Travel, 10,000 lbs - SWQ 183 DL-BX




California residents: click here



Customer Reviews

Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Planetary - 26" Lift - 10,000 lbs - BD183816

Average Customer Rating:  4.9 out of 5 stars   (12 Customer Reviews)

With a front-facing plunger pin and 29-1/2" retracted height, this jack offers maximum lifting power in low gear and the fastest cranking in its weight class in high gear. No need to reposition the crank to switch gears. Crank sold separately.

- BD183816
by:

Welded the new Jacks were I cut the old ones off the cross rod work with the new Jacks everything work out good if you need jacks this is the place to go 931440



- BD183816
by:

Fast friendly service. Thank you 730531



- BD183816
by:

Product arrived in a heavily damaged box. Other than a few scratches product was in good shape. Since this jack is a weld on unit, it would be a good idea to supply the decals unattached as they do melt when welding. Have dealt with etrailer in the past and always receive great service and value. 691342



- BD183816
by:

Allways happy with etrailer 474963



- BD183816
by:

After welding some mounting brackets onto the jack, mounting and hooking up the wires, was very simple. Bulldog makes a good product. Mark M. Was very helpful and knowledgeable enough about his product line to help get the right jack for my application. 239416



- BD183816
by:

Good product, great service, pleased 235828


Comments
Questions answer quickly and professionally, great product and service.
HP - 01/26/2017

22304

- BD183816
by:

Outstanding service could not be happier 171065



- BD183816
by:

just finished getting this mounted on trailer, quality jack for sure. will be buying more from etrailer.com. 168671



- BD183816
by:

This 2 speed jack is just what I needed for my 32' stock trailer. Extremely fast shipping. Thanks. 97453



- BD183816
by:

the two speed gear works great makes lifting my 42 ft goose neck easier than the stock jacks that came on it.if i was going to replace a jack i would definitely go with the two speed jack and e trailer is a great place to buy,very helpful and fast shipping i would recommend them 55506



- BD183816
by:

Very good product, it works great! Delivered sooner than expected. Very satisfied. Thanks, Lazaro 25628



- BD183816
by:

My 1st 2 speeed Unit I have always been happy with the "Bulldog" brand products .... and was a little skeptical of the planetary gearbox and the "shifting" from High to Low. I have no reservations now!!!! The unit works flawless!!! shifting is easy and "crisp" This was my first purchase from etrailer, .... WoW I have bought from many on line stores ...... I have never seen the follow up, attention to detail and quality coorespondence that etrailer has demonstrated on this purchase!!!!! I definately will have etrailer in my Favorites list!!!!!!!! 5101


12
12

Ask the Experts about this Bulldog Camper Jacks

  • How Does the Bulldog 2-Speed Jack - Drop Leg, # BD183816 Shift Between Gears
    The Bulldog 2-Speed Jack - Drop Leg, # BD183816, shifts gears manually when you need to. High gear is engaged when the shaft of the handle is pushed in. Low gear is engaged when the shaft of the jack handle is pulled out. The jack handle crank is not included. There are are two possible options for cranks. One is the Bulldog Sidewind Jack Crank Assembly with Horizontal Clevis, # BD800090 and the other is Bulldog Sidewind Jack Crank Assembly with Vertical Clevis, # BD015181.
    view full answer...
  • Recommendation for a Tandem Jack Setup on a 20k GVW Dump Trailer
    The Bulldog 2-speed jack # BD183816, that you referenced would work well as a jack in a tandem setup for you. Each of these jacks is rated for 12000lbs, so they would work well on your dump trailer that has a 20000lb GVW. I spoke with my contact at Bulldog about whether or not you can use the 2-speed function of this jack when used in tandem and he said that you will be limited to only one gear when jacks are used in tandem. You may also be interested in purchasing a Replacement Bulldog...
    view full answer...
  • Recommended Replacement Electric Jack for Atwood 10,000 lb Landing Gear
    Thank you for the photos. Unfortunately there is not a replacement motor for the Atwood jack that you have. I think your best option is to replace the jack and the motor to get a working assembly. I recommend the Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Planetary - 12-1/2" Lift - 10,000 lbs # BD183816 along with the Bulldog Powered-Drive Kit for OEM 2-Speed Planetary Jacks w/ 12,000-lb Capacity # BD1824180100. Another option is to use the more traditional Reese Electric...
    view full answer...
  • Can I Replace Just One Jack on 2012 PJ Flatbed Trailer With Bulldog 2-Speed Jack, Part # BD183816
    In order for your existing single-speed trailer jack to work with the Bulldog 2-Speed Jack - Drop Leg w/ Spring Return, part # BD183816, it is essential that the existing jack have a cranking ratio (the number of handle turns that moves the jack one inch) that is the same as the 9-turns-per-inch high gear ratio of the Bulldog. If the two jacks do not have the same turns ratio, then the trailer will elevate unevenly, creating a safety hazard. My contact at Bulldog tells me that if the...
    view full answer...
  • What is the Difference Between a Horizontal Clevis Crank Handle and a Vertical Clevis Crank Handle
    The clevis in regards to Bulldog 2-Speed Jack, part # BD183816, is the style of the crank handle for the jack. The difference is in the alignment of the pivot point to the rest of the crank handle. A horizontal clevis crank handle when folded up will pivot almost like a wing and lay flat on the side of the trailer when not in use, whereas a vertical clevis crank handle will pivot in like an elbow and fold in to the trailer and be secured in place. In order to pick the right one for...
    view full answer...
  • Motor for Bulldog Planetary Jack BD183816 Differences between Planetary and Traditional
    The Bulldog Powered-Drive Kit for OEM 2-Speed Planetary Jacks # BD1824180100 is compatible with the Bulldog 2-Speed Jack # BD183816 that you referenced. However, when you install the Powered Drive Kit part # BD1824180100 you limit the jack to a single speed. With typical load lifts this motor will lift at a rate of 3 inches per minute. There isn't an attachment available to use a powered drill though. The difference between a jack with a traditional gear box and a jack with a planetary...
    view full answer...
  • Attachment Recommendation for the Bulldog 2-Speed Jack # BD183816
    Yes, the recommended method for installing the Bulldog 2-Speed Jack # BD183816 is to have a qualified welder weld the corners of the jack to the frame of your trailer. This does not come in white but you could have it painted white if you wanted.
    view full answer...
  • Dimension on the Bulldog 2-Speed Trailer Jack # BD183816
    On the Bulldog 2-Speed Trailer Jack, part # BD183816 the overall width dimension of the outer square tube is 4 inches. The maximum length of the outer square tube is 25.13 inches The overall width dimension of the inner square tube is 3-1/2 inches. The inner tube can be removed from the outer tube, but you would have to take apart everything in the outer tube to be able to remove the inner tube. The drop leg at the bottom can just be removed from the inner tube by pulling the...
    view full answer...
  • Dimensions of Bulldog 2-Speed Planetary Jack # BD183816
    I went to our warehouse and measured the Bulldog 2-Speed Planetary Jack # BD183816 to get you the dimensions you need. The handle shaft has a 1-inch diameter and the center of this shaft is 3-inches down from the jack top plate. These dimensions are shown on the photo I prepared for you.
    view full answer...
  • How to Remove Pin in Handle Shaft to Replace Gears on an Older Bulldog Model 12 Square Jack
    I spoke to my contact at Bulldog who said that the Model 12, 180 Series Bulldog jack that you have is the older version of the the current 10K jacks like part # BD182500. Since you have the older version without the spring that you mentioned seeing in other videos it means that pin you are trying to remove has knurls on it. When it was first installed that pin hole was smooth and the knurls on the pin basically "carved" into that pin hole. To remove it you need to use a punch and quite...
    view full answer...
  • Is There a Powered Drive Kit for the Ram Square 2-Speed Jack
    The Ram Square 2-Speed Jack part # TJD2SP-12000SP-F does not have any sort of compatible powered drive kit available. That said, if you were to go with the Bulldog Square 2-Speed Jack part # BD183816 you could then use the Bulldog Powered-Drive Kit part # BD1824180100. The Bulldog Powered-Drive Kit may be able to used with the Ram Square 2-Speed Jack but there could be modifications required.
    view full answer...
  • Power Drive Unit For Bulldog Landing Gear
    The Replacement Bulldog Gear Motor part # BD1046130-00 replaces the powered-drive kit in Bulldog electric single-speed jacks. There are not any powered-drive kits available for the landing gear with the traditional triangular gear box. You would need to upgrade the landing gear to a planetary 2-speed jack part # BD183816 and part # BD182815 with 4 inch tubing. Then add a powered drive kit gear motor part # BD1046130-00. You can use your existing wiring and switch.
    view full answer...
  • Availability of Bulldog 12,000 lb 2-Speed Trailer Jack
    Yes, for a Bulldog 12,000 lb static (10,000 lb lift) capacity we have the following jacks for you: Bulldog 2-Speed Jack - Drop Leg w/ Spring Return - Planetary - 26" Lift # BD183816 (front facing plunger pin) Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift # BD183416 (front facing plunger pin) Bulldog 2-Speed Jack - Drop Leg w/ Non-Spring Return - Planetary - 26" Lift # BD183401 (side facing plunger pin) Bulldog 2-Speed Jack - Drop Leg w/ Spring Return...
    view full answer...
  • Would Bulldog Jacks # BD182815 and # BD183816 Work Well on 24k Trailer
    If you ran the Bulldog Jacks part # BD182815 and # BD183816 on a trailer that weighed a max of 24k you'd be good. Each of these jacks has a 10k lifting capacity so you'd have 20k of lifting capacity which is more than enough for the front of a 24k trailer. The jacks are not rated for the total trailer weight and are instead just rated for the amount they can lift vertically.
    view full answer...
  • Comparison of the Bulldog Heavy Duty Jack Traditional Style Gear Box and a Planetary Style Gearbox
    The difference between a jack with a traditional gear box and a jack with a planetary gear box is the gears inside the unit, the number of shafts on the unit and the attachment of the units to the jack. The gears in a planetary gear box use gears that can be moved to change speeds, this type of gear box has gears that can be sized very differently also. This gear box can be changed out and the operation of the jack is very smooth. To change speeds on this jack a single shaft is moved...
    view full answer...
  • How to Tell if a Bulldog 10K/12K Jack is a Single Speed or 2-Speed
    The Bulldog 10K/12K jacks with 2-speeds will have a gear box on them such as # BD183816 and so for it you would use powered drive kit # BD1824180100. The single speed jacks will not have a gear box like # BD182815 so you would use kit # BD1824200100.
    view full answer...
  • Bulldog 2 Speed Jack Recommendation to go Along with the Bulldog Powered Drive Kit for 2 speed Jacks
    The Bulldog Powered-Drive Kit for OEM 2-Speed Planetary Jacks # BD1824180100 that you referenced is compatible with the Bulldog 2-Speed Jack # BD183816 that you referenced. However, when you install the Powered Drive Kit part # BD1824180100 you limit the jack to a single speed. With typical load lifts this motor will lift at a rate of 3 inches per minute.
    view full answer...
  • Which Bulldog Powered Drive Kit Works with 2 Speed Bulldog Landing Gear Trailer Jacks
    A 2 speed jack will have a second gear set attached to the jack. It would either be operated by taking the handle off of the first speed and moving it to a separate spot on the jack for the second speed or, more commonly, the crank handle will be pushed in or pulled out to engage the second gear set. Take a look at the Bulldog 2-Speed Jack, # BD183816, as an example. It does matter between single and 2 speed when you are looking to add a powered drive kit. The powered drive, # BD1824200100,...
    view full answer...
  • Can the Bulldog Powered-Drive Kit be Used on Any Jack
    The Bulldog Powered-Drive Kit part # BD1824180100 is for two speed jacks whereas the Bulldog Powered-Drive Kit part # BD1824200100 is for single speed jacks. However, we can only confirm that these work with Bulldog jacks that have a 12,000 lb support capacity like part # BD182400 for single speed or part # BD183816 for two speed.
    view full answer...
  • Trailer Jack Weight Capacities for Lifting and Holding Weight
    A trailer tongue jack like Pro Series # PSEA20000103 has a rated lift capacity of 2000-lbs. Two of them would have twice the capacity but this type of jack is typically used singly on an A-Frame trailer. Other types of jacks like a 5th wheel dual-jack landing gear kit # BD500162 consists of two separate but interconnected jacks each able to lift 4000-lbs which gives this kit its overall 8K rating. In comparison a stabilizer scissor jack like # UF48-979002 will have a much higher weight...
    view full answer...
  • Which 2 Speed Powered Drive Kit is a Fit for 2 Speed Bulldog Jack
    The Bulldog Powered-Drive Kit for OEM 2-Speed Planetary Jacks # BD1824180100 that you referenced is compatible with the Bulldog 2-Speed Jack # BD183816 but not the part # BD183903 that you referenced. However, when you install the Powered Drive Kit part # BD1824180100 you limit the jack to a single speed. With typical load lifts this motor will lift at a rate of 3 inches per minute.
    view full answer...
  • Turns Per Inch of Travel For Bulldog Square Jack
    I spoke with my contact at Bulldog about the turns per inch of the Bulldog Square Jack # BD182500 that you referenced. He told me that the Bulldog single speed jacks have 9 turns per inch of travel. Bulldog manufactures all of the 10,000 pound landing gear jacks we offer. Bulldog offers the Bulldog Powered-Drive Kit for Single-Speed Jacks w. 12,000 Pound Capacity # BD1824200100. This powered drive will operate Bulldog single-speed jacks with a 12,000 pounds static capacity, like # BD182500....
    view full answer...
  • What is the Difference Between Bulldog Landing Gear Jack # BD183416 and # BD183816
    Basically, the difference between Bulldog jack # BD183416 and # BD183816 is the plunger. On the first one, # BD183416, it has a non-spring return plunger. This means that when you pull out the pin to drop or raise the leg, you have to manually re-insert the pin to secure the leg. On jack # BD183816, it has a spring return. This means that after you pull the pin out to adjust the leg, a spring will put tension on the pin and automatically push it back into a hole in the jack leg (unless...
    view full answer...
  • Options for Installing Powered-Drive Kit with Bulldog Landing Gear Jacks
    The Bulldog Powered-Drive Kit # BD1824180100 that you referenced is not compatible with landing gear like the Bulldog 2-Speed Jack, Traditional, 10,000 pounds # BD183901. My contact at Bulldog confirmed that there is not a motor kit available for the jacks with the triangular gear housing, like that on the # BD183901 landing gear jack. To be compatible with a powered-drive kit, you will want to update your existing landing gear with either single speed landing gear or 2-speed landing...
    view full answer...
  • Installation of Powered Drive Kit for Bulldog Jack BD183816
    For your Bulldog 2-Speed 10K Jack # BD183816 the powered drive kit to use is part # BD1824180100; I confirmed this with the tech team at Bulldog. The power drive kit will install with the motor on the inboard side, closer to the trailer. The written instructions for this kit are linked for reference.
    view full answer...
  • What Types of Jacks do the Bulldog Powered Jack Motor Kits Fit
    The Bulldog powered drive kits we offer like the part # BD1824180100 and the # BD1824200100 are only fits for Bulldog jacks that have 12k capacities. The part # BD1824200100 is for single speed jacks and the # BD1824180100 is only for 12k 2 speed jacks. Sounds like you might have the # BD183816 which we do not have a motor kit for.
    view full answer...

Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Sarah W
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-8924