Can you Bypass/Replace the Factory Transmission Cooler on a 2006 Nissan Pathfinder
Published 08/24/2017
Products Featured in This Question
Question:
Thank you for you very knowledgeable responses to previous questions. You however keep referring to bypassing the factory transmission cooler as not the manufacturers recommended method. What then would be the manufacturers recommended method? Thanks,
asked by: Julain T
Expert Reply:
All of our transmission cooler manufacturers (Derale/Flex-a-lite) recommend installing their transmission coolers in conjunction with a factory transmission cooler. In other words, the recommended placement for a transmission cooler is after the factory transmission cooler and before the fluids running back to the transmission. On most cars today, the vehicle is equipped with one or two methods to cool the transmission fluid.
The first method automobile manufactures use to cool the transmission fluid is through the radiator. The transmission fluid cycled through the transmission will then be rerouted into the radiator for cooling and then back out. Depending on the vehicle, the outlet on the radiator will then run to an additional auxiliary cooler which is generally located in front of the radiator and behind the grill then back to the transmission. These coolers are typically smaller in size if even equipped.
If you will be towing or hauling a heavy load with your vehicle than it is recommended to install an additional transmission cooler. Depending on the size of the cooler you install, you can either replace the auxiliary cooler or reroute the new cooler from the auxiliary cooler. However, I do not recommend bypassing the lines from the radiator as this is the vehicle's main source for cooling the transmission fluid unless using a remote mount cooler like the Derale 8-Pass Electra-Cool Remote Cooler Assembly w/ Fan part # D13720.
For your 2006 Nissan Pathfinder, I recommend installing the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets part # D13503. If your vehicle has an auxiliary cooler than you can either use this to replace that cooler or install this cooler after the auxiliary cooler. The only reason I would replace the factory auxiliary cooler is if space was reduced. It is always recommended for fix mount coolers to be installed in front of the radiator behind your grill.
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Article: The Best Towing Mirrors
- Search Results: brake controllers
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Transmission Cooler
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: Comparing Flex-A-Lite And Derale Transmission Coolers For A 2016 Honda Pilot
- Q&A: Does Derale Transmission Cooler fit 2017 Chevy Colorado
- Q&A: Why are Transmission Coolers Installed on the Fluid Return Line After the Radiator Mounted Cooler
- Shop: Performance Chip Tuners
- Shop: Transmission Cooler
- Video: A Closer Look at the Longview Custom Towing Mirrors-CTM1600
- Video: Review of the CIPA Custom Towing Mirrors
- Video: Install: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets on a 2013 Honda Odyssey
- Video: Setting up the Longview Custom Towing Mirrors on your 2024 GMC Sierra 1500
- Video: Install: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets on a 2017 GMC Canyon
- Video: Checking Out the Longview Custom Towing Mirrors-CTM1600
- Video: CIPA Custom Towing Mirror Feature Review
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Shop: Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
- Shop: CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
- Shop: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class II - Efficient
- Shop: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV - Efficient
- Shop: Bracket Kit for Derale High Performance Stacked-Plate Coolers
- Shop: WeatherTech Pet Barrier with Extension Kit for Cars and SUVs - Universal Fit
- Q&A: What is Difference Between Redarc Tow Pro Liberty and Elite
- Q&A: Towing Mirror Recommendation for a 2013 Chevy Silverado
- Q&A: Best Transmission Cooler For 2007 Honda Pilot 4WD
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Transmission Coolers
