Mounting Hole Size and Spacing on Mighty Cord Replacement 30-Amp RV Power Inlet A10-30INBKVP

Question

Question:

what are the mounting hole sizes and center -distances on this item ? thanks

asked by: Lee M

1

Helpful Expert Reply:

I went to our warehouse and measured the Mighty Cord Replacement 30-Amp RV Power Inlet # A10-30INBKVP and found its four mounting holes are 1/8-inch diameter and they are spaced apart 2-7/16-inches on center.

expert reply by: Adam R

1

Pat

3/6/2025

What size hole in the trailer wall is required? Thanks

Bryce D.

3/6/2025

@Pat It looks like it has a rear channel dimension of 2-13/16" wide so you'd need hole at least that big.

Pay

3/6/2025

@BryceD Thanks I saw that - but was wondering how the mounting screw holes are spaced at 2 7/16 with the large mounting hole cut at 2 13/16. Screws must be very close to the edge of the hole. I guess I will find out as soon as it arrives. Thanks

Bryce D.

3/6/2025

@Pay That's a good point, let me head out to the warehouse and pull this part real fast - I'll reply back with the actual measurements so you don't have to wait until it gets here.

See All (6) Replies to Pat ∨

Answer 1

Hey Debbie, thanks for reaching out! We have kits like the B&B RV Electric Cable Hatch #BM85MR to help cover power inlets, but if you're looking for a cover that comes with an inlet, we unfortunately don't have those - you'll either…

view full answer...

Answer 2

Along with your Mighty Cord 30 Amp Twist Lock RV Power Inlet #A10-30INVP you can use their mating replacement female Twist Lock Connector #A10-30FDT. If you care to add a weather-resistant locking ring you can also use part #A10-30CV.

view full answer...

Answer 3

To be perfectly honest, unless you're pretty knowledgeable when it comes to RV wiring, you'd be well served by having somebody look at your travel trailer. The discoloration you mention tells me that this has probably been an ongoing problem,…

view full answer...

Answer 4

For a bearing kit for a Dexter 5200 axle we have the kit part #BK3-300 which comes with the correct bearings, races, and seal for your axle.

view full answer...

Answer 5

The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA is actually the same unit as the PD4045KV. The KV is just an alternate part number for the same unit so this is the one that you want for a replacement.

view full answer...

Answer 6

I spoke with the manufacturer of the SmartPlug RV and Marine Power Inlet and Connector #SM67FR and for your application they actually recommend using 6 AWG wire to properly supply your RV with power from the shore power pedestal.

view full answer...

Answer 7

When it come to wiring your Atwood GC6AA-9E hot water heater, you're going to want to go with a wire that's sized to accommodate the heater's current requirement. For example, a 20-amp hot water heater needs 12-gauge wire, a 25-amp hot…

view full answer...

Answer 8

All of the wiring at the back of the Progressive Dynamics Mighty Mini #PD4045KA that you referenced is 10 gauge.

view full answer...

Answer 9

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 10

The diameter hole needed to install the Mighty Cord Replacement RV Power Inlet #A10-30INBKVP that you referenced is 2-7/8 inches.

view full answer...

Answer 11

You are correct that you'll need to attach the AC Converter Hot (Black Wire) to a 15 amp breaker when installing the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA. You will not be limited to 15 amps on the DC…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Mounting Hole Size and Spacing on Mighty Cord Replacement 30-Amp RV Power Inlet A10-30INBKVP

Product Page this Question was Asked From

Continue Researching