Replacement Female 30 Amp Twist Lock Connector for Use with Twist Lock RV Power Inlet A10-30INVP

Question

Question:

Im looking at converting my RVs 30 amp power kit to a twist lock. I found Mighty Cord Replacement RV Power Inlet - 30 Amp Twist Lock - White... Code: A10-30INVP. Ill need the female end to convert the existing power cord. Do you have one? Or a kit that include both. Thanks.

asked by: Ivan R

1

Helpful Expert Reply:

Along with your Mighty Cord 30 Amp Twist Lock RV Power Inlet # A10-30INVP you can use their mating replacement female Twist Lock Connector # A10-30FDT. If you care to add a weather-resistant locking ring you can also use part # A10-30CV.

expert reply by: Adam R

1

Answer 1

The Epicord 30 Amp Twist Lock Power Inlet #277-000138 has it's own waterproof cover. The Weatherproof Cover w/ Threaded Ring #A10-30CV is designed to fit a Twist Lock 30 amp connector like the part #A10-30FDT.

view full answer...

Answer 2

I went to our warehouse and measured the Mighty Cord Replacement 30-Amp RV Power Inlet #A10-30INBKVP and found its four mounting holes are 1/8-inch diameter and they are spaced apart 2-7/16-inches on center.

view full answer...

Answer 3

Hey Lisa, with the Seaflo Battery Disconnect Switch part #SE29VR you'd only need one for a bank of two batteries like what you can see in the attached picture.

view full answer...

Answer 4

Hey Debbie, thanks for reaching out! We have kits like the B&B RV Electric Cable Hatch #BM85MR to help cover power inlets, but if you're looking for a cover that comes with an inlet, we unfortunately don't have those - you'll either…

view full answer...

Answer 5

The Mighty Cord Replacement RV Power Inlet - Twist Lock - 30 Amp - White #A10-30INVP has a removable cover to protect the wire connections so I've measured the depth of the outlet with the cover on and off (pictured below).

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Female 30 Amp Twist Lock Connector for Use with Twist Lock RV Power Inlet A10-30INVP

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching