Dimensions for Wheel Masters Lug Nut Covers - Stainless Steel # WM8010

Updated 08/18/2017 | Published 08/17/2017

Question:

total diameter tip to tip at bottom opening & height bottom to top.WM8010 I want to try and use these covers to modify a standard DODGE DAKOTA 6 lug cap that was only offered from 91-93 to give it a nice dressed appearance. The caps were only offered as a painted cap on the wheel and never in chrome and the simulated lugs on it are a round circle, this is not the cap that was on the alloy sport wheels. This cap was only on the steel wide spoke type wheel. The circle lug simulation on it is 1inch and a lug cover at 1inch tall or 1 1/8inch would work nice I think and I want to use stainless. Thank You Tim

asked by: Tim

Expert Reply:

The Wheel Masters Lug Nut Covers # WM8010 referenced in your question are designed for 1 inch lug nuts. The overall length on the cover is approximately 1-1/4 inches, from the base to the very tip. The total diameter of the bottom opening is just over 1-1/4 inches (1.28 inches to be exact).

I cannot be sure that these will fit the cap on your Dodge Dakota, as they are designed specifically for GMC and Chevy trucks, but these are the only lug nut covers we currently have available that are for 1 inch lug nuts.

expert reply by: Chris R