Availability of Wheel Tray and Wheel Tray Mounting Hardware for Yakima Two Timer

Question

Question:

Do you have either of these parts for sale? For Yakima Two Timer bike rake: assembly part no. 8880521 hardware part no. 8880520 Please advise

asked by: Bob W

0

Expert Reply:

We have the wheel mounting hardware # 8880520 for the Yakima TwoTimer. The wheel tray has been replaced with # 8880796 which is what you'd need.

expert reply by: Jameson C

0

Answer 1

I'd be happy to help out! The way to choose correctly between the Replacement "A" #8880796 and "B" #8880797 trays for your Yakima FourTimer is how many bumps you'll find at the base of the wheel cup "(or tray). Our…

view full answer...

Answer 2

According to Yakima, the difference between the Replacement "A" Wheel Tray Assembly #8880796 and Replacement "B" Wheel Tray Assembly #8880797 is the following: "Look at the base of the wheel cup and look at the cut out above…

view full answer...

Answer 3

I attached a picture that shows a TwoTimer labeled with what each of the wheel holder types is. For an A holder you'd need the #8880796 or for a B you'd need the part #8880797.

view full answer...

Answer 4

If it's the buckle assembly you'd have to replace the entire cradle like with the part #8880797 or the #8880796 depending on which cradle it is. If it was actually the strap the part number you need is the #Y8880229.

view full answer...

Answer 5

It sounds like you are looking for the Replacement "B" Wheel Tray Assembly for Yakima TwoTimer and FourTimer Bike Racks #8880797, for your Yakima TwoTimer Bike Rack. This product replaces a wheel tray assembly "B" with grey wheel…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 12

The Hollywood Racks Trail Rider 2-Bike Rack #HR200 weighs about 35 lbs. The Swagman XC 2-Bike Rack #S64650 is lighter at about 26 lbs. The biggest difference between the two is the Swagman rack is rated for 2 bikes at 35 lbs each and the Hollywood…

view full answer...

Availability of Wheel Tray and Wheel Tray Mounting Hardware for Yakima Two Timer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching