Replacement Stabilizer Jack for Lippert Components Power Stabilizer Jack  

Hey Tyler, so the difference is the amount of motors that each has. The Lippert PSX2 has two and the Lippert PSX1 like the part #LC298707 has a single motor. The foot print and mounting etc. is exact same so this will fit and work great in place of…

I assume you are asking about wiring the switch of the Lippert Components High-Speed Power Stabilizer Jack #LC369774. For this, please refer to the accompanying cutout I added; your jack uses Switch #LC144214 so as the diagram makes clear, the…

The Lippert Stabilizer Jack 347132 (discontinued part LC363284 on our site) has mounting hole centers that are 68-11/16" apart which is the same as our High-Speed Stabilizer Jack #LC298707 so it can definitely be used as a replacement! The…

The Lippert High-Speed Power Stabilizer Jack #LC298707 would not be able to mount to your frame since you only have 68-1/4" from outside to outside edge and this stabilizer requires a 68-11/16" spacing. Instead I recommend installing the…

Thank you for the photo; we have the exact replacement for your Lippert 113407 electric stabilizer jack; the Lippert Components High-Speed Power Stabilizer Jack #LC369774.

I do have a solution for you to have a working stabilizer again but unfortunately when I spoke with my contact at Lippert he said that the legs on your 198641 unit are not replaceable alone. Instead you will need to replace the whole stabilizer jack…

Yes, the 30" lift Lippert High-Speed Power Stabilizer Jack, #LC298707 can be installed on the front and rear of a travel trailer. Please note that this jack is designed to stabilize your trailer an not to support the full GVWR. Do not use these…

The Lippert High-Speed Power Stabilizer Jack #LC369774 don't have a weight capacity because it is designed to essentially just fill the gap between your trailer frame and the ground - this isn't meant to lift the trailer so they haven't…

I do have an option for you but we don't carry the Lippert PSX2 Stabilizer Jack 695602. Instead, we carry the Lippert High-Speed Power Stabilizer Jack part #LC369774 for a white switch, or part #LC298707 for a black switch. These are very similar…

For your Lippert PSx1 Stabilizer, the Replacement Electric Stabilizer Jack Support Arm part #LC1134122 is what you need if you are looking to simply repair your jack. If instead you are looking to replace the entire unit then the Lippert Components…

Hi Thomas, There isn't anything specific for your 2011 Sunset Trails, but it's pretty easy to determine if the Lippert High-Speed Power Stabilizer Jack #LC298707 will work. You just need to have space to mount it, and this stabilizer has…

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…