7-Way Trailer Connector for 2011 Toyota Highlander

Updated 04/13/2011 | Published 04/11/2011

Products Featured in This Question

Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps

(314)

$45.73

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3480)

$118.67

Question:

I just purchased a 2011 Hylander and need to install a 7 pole trailer connector. We plan plan to purchase a Casita camper and they use a 7 pole connector. What do I need?

asked by: Ernie

Expert Reply:

If all you are needing to do is provide lighting functions for the camper (directionals, running lights and brake lights) and if your Highlander already has a 4-pole trailer connector, you will only need a 4-pole to 7-way Adapter, part # 37185.

If you do not already have the 4-pole connector, you will additionally need the T-1 Connector, part # 118449.

If your camper has electric brakes, you will need a brake controller. I would recommend the Tekonsha Prodigy P2, part # 90885. The P2 is our best selling and easiest to use brake controller. To install the controller, we offer a Brake Controller Install Kit, part # ETBC7. The kit contains the 4-pole to 7-way adapter mentioned above, plus all circuit breakers, installation hardware and wire.

We have some excellent resources to assist you with the brake controller install, if necessary. I will link you to some helpful FAQ pages as well as an installation video. The video shows a controller being installed on a different vehicle, but the procedure on your Highlander would be very similar.

expert reply by: Mike L