What Size Trailer Wheel Center Hole Fits Trailer Idler Hub for 3,500lb Axles 5 on 5 AKIHUB-550-35-K
Updated 07/10/2017 | Published 07/07/2017
Question:
What is the minimum wheel center hole diameter that will fit this spindle ?
asked by: Jeff
1
Helpful Expert Reply:
Basically, 2.62 inches is the smallest wheel pilot hole for Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 Item # AKIHUB-550-35-K. The hub takes wheels as small as 14 inches and the smallest pilot hole diameter on a 14 inch wheel is 2.62 inches. The vast majority of 14 inch wheels will have a 3.19 or 3.27 inch pilot hole though.
expert reply by:
Michael H
1
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Timbren Axle-Less Trailer Suspension Compatibility with Jeep 5 on 5 Bolt Pattern
- Q&A: Replacement Brake Assemblies for Dexter 3,500 lb Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How Long Does It Take to Install the Demco Stay-IN-Play Duo Braking System?
- Q&A: Dexter 008-256-07 Trailer Hub Replacement
- Q&A: Recommended Axle To Use Off-Road Jeep Wheels/Tire On Trailer
- Q&A: How to Determine Correct Hub Replacement for 1994 Jayco Eagle SD with Dexter Axle
- Q&A: What is Hub Pilot Diameter of 3,500 Trailer Hub # AKIHUB-550-35-K
- Article: Trailer Tire Sizing
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps