Product Experts Available Now!
Call 800-298-8924
/
Fulton/
14 Inch Wheels/
Plastic/
42-5/8 Inch Long/
BlackItem # F008584-2
Our Price: $69.61
This item qualifies for Free Shipping
9-5/8" Wide x 42-5/8" long x 12-3/4" tall, polyethylene fenders are corrosion proof, impact resistant and able to handle extreme temperatures. Molded-in color makes scratches virtually invisible. Built-in top and side steps.
Features:
Specs:
Dimensional Information
Video of Fulton Single Axle Trailer Fenders with Top and Side Steps - Black Plastic - 14" Wheels - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number F008584-2. These are the Fulton Single Axle Trailer Fenders with Top and Side Steps, black plastic, designed for 14" diameter wheels. This part number is going to come with two fenders. For the video today I just got one, that way we can go over the features. Both fenders are going to be identical, but keep in mind you are going to get two fenders with this part number. I just want to go over a few features real quick to get started. You can see here it's going to offer three steps.
Each step is going to have a nice textured surface for a good grip. You're going to have the built in fender skirt here on the back side. The fenders are going to be great additions to your trailers. They're going to keep road debris from harming other vehicles on the road. They're also going to protect whatever it is that's on your trailer. Here on the back side you're going to have an opening right here.
These are going to be your mounting slots. They are going to give us an opening size measuring this direction of 4-1/8". As we flip it over, on each side you're going to have two pre-drilled mounting slots. You can see those right there. These are going to have a separation of 3-3/4".
This is designed to be a bolt on installation with your existing mounting brackets. If you don't already have brackets you can find some on our website but it does use the existing hardware or brackets specific to your trailer frame. Again, those are going to be sold separately. If you don't have some, check out some options here on our website. Again, you're going to have the three steps. This fender is going to offer a weight capacity of 300 pounds.
It's made from a high density polyethylene material so it's going to be corrosion proof and impact resistant. It's going to feature a scratch proof design because the black color is actually molded into the plastic of the fender, it's not painted on. This fender is going to be made in the U.S.A. It's designed for single axle trailers with 14" diameter wheels. Again this part number is going to include two fenders. Taking a look at the overall dimensions, starting with the overall length measuring from edge to edge, that's going to give us a measurement of about 42-5/8". It's going to give us an overall height of about 12-3/4". Taking a look at the width, that's going to give us a measurement of about 9-5/8". The top step is going to give us an overall width of about 8". An overall depth of about 5". Again it's going to have the nice textured surface, that way you get a secure grip on there. The side steps are going to be identical. They're going to give us an overall depth of about 9" going this direction. Here at the widest point, about 6-1/2". It's going to feature that weight capacity of 300 pounds. The height of this area right here is going to measure 2-7/8" measuring from the base to the top. I believe that's going to do it for today's review of part number F008584-2. These are the Fulton Single Axle Trailer Fenders with Top and Side Steps for 14" diameter wheels. With this part number you're going to get two fenders. .
Average Customer Rating: 4.4 out of 5 stars (21 Customer Reviews)
9-5/8" Wide x 42-5/8" long x 12-3/4" tall, polyethylene fenders are corrosion proof, impact resistant and able to handle extreme temperatures. Molded-in color makes scratches virtually invisible. Built-in top and side steps.by: Marko04/28/2017
Excellent quality fast shipping and good explanation on measurements definitely recommended 373699
by: Robin09/26/2016
Bolted up great and still working well 1 year later! 300018
by: Brian aka walleye master07/20/2017
The new fenders arrived tonight and fit perfect! Very satisfied! Would definitely do business here again. Cheers 408541
by: William H05/06/2017
Just what the Doctor ordered. Fit fine. Only one problem..being a generic fit fender I had to open up the inner holes a bit for proper fit. Installation took 1 1/2 hours once I got the old fenders off. 377184
by: Mike S.07/30/2014
Product is lighter than the original fender on my Shorelandr boat trailer but it looks good and supports my 225 lb body when I need to get into the boat. I needed to drill two new holes in the fender to match the supports on the trailer. I have 15" 205 tires on my trailer with adequate clearance between the tire and the fender. I only have one trip (500 miles) with the new fender so it is too early to rate it a 5. 143538
Did your Shorelandr trailer have the marker lites on the original??
-- comment by: George - 03/01/2016The original Shorelandr fender had one orange light on the front. I didnt replace it on the new fender but it would be easy to do just drill two small holes.
-- comment by: Mike S - 03/03/2016 by: David06/13/2018
Poor quality, thin plastic. Not installed, will not order again. 521275
by: Dennis05/18/2018
Very thin too much flex when using the junk bracket they sell you to install the fender. I used a 3/16" stainless steel plate with the bracket to add support to the bracket and fender so I could safely enter my boat using the front, rear and top step. 510012
by: Stan04/11/2018
Exact replacement fenders with great price. Super fast shipping. I will buy from Etrailer again. 495313
by: Jake09/12/2017
Excellent. Fast delivery! Very satisfi ed! 431498
by: Brian.B06/02/2017
Great Product fast delivery! 387931
by: Rick C04/16/2017
The order was just what I needed. The shipping was two days quicker than I expected. Great experience. 368187
by: Fishhewes04/06/2017
I replaced the original fenders with the Fulton fenders. They have a step on front and rear which is very convenient. These fenders do a great job of keeping dirt and debris off the boat. I put a backing plate on the inside across both front and rear mounting bolts to help prevent cracking. Thanks Ashley for the quick service and follow up! 363738
by: Jim B04/03/2017
Haven't tried them yet but service was great 362241
by: Kansas twins03/14/2017
That was fast service and shipping . when you need it fast don't go any were else 352687
by: Rich F.07/23/2016
Product fit perfectly. Placed on-line order at 10:30 pm, and by next morning, received e-mail confirmation that product had already shipped out of warehouse. Impressive service, as always! 275549
by: MIKE WATSON07/20/2016
I HAVE HADMY FENDERS FOR A YEAR AND HAVE NOT HAD ANY PROBLEMS SINCE I GOT THEM, I WILL PURCHASE MORE IF NEEDED THANK YOU SO MUCH. MIKE W. 274159
by: Tom S.06/25/2016
Fit like a glove. Easy install. Just wish they were a little heavier gauge material. Better re enforce the top step if you're heavier than the average 8th grader. Over all I'm happy with them. Even more impressed by etrailers great service & fast turn around. 264949
by: Bob S.08/11/2015
The purchase was pain free and delivery fast. I received my fenders and brackets in one box quickly from etrailor. I really like the fender and the way it looks on the trailer, however I could not find what I would consider to be the proper bracket for this application and therefore the side steps can not be used because they have no strength of their own. I would recommend mounting instructions and either brackets with the fenders or recommendations on line for which to use. 218481
by: William02/12/2013
thank you very professional and will gladly recommend to all my friends. 65948
by: larry smaaland03/13/2012
fast delivery 33722
by: Bill J.11/12/2011
I was happy to find the exact fenders that were on my trailer. I only had to drill 2 holes to mount the lights and I had new fenders installed in 15 minutes. 26865
Ask the Experts about this Fulton Trailer Fenders
Do you have a question about this Trailer Fender?
Do you have a question about this Trailer Fender?
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.