Axle Recommendation For Use With Kodiak Disc Brake Kit, part # K2HR526DS
Updated 03/14/2011 | Published 03/11/2011
Products Featured in This Question
Question:
I am building a new trailer. Can you advise which axle to buy for this brake set? Do you have a torsion axle to fit this brake set? Many thanks
asked by: Leigh D
Expert Reply:
The Kodiak Disc Brake Kit, part # K2HR526DS, will fit on a 5200 lb to 6000 lb axle with 5-bolt brake mounting flanges. This kit will require you to use 15 inch and larger wheels with a bolt pattern of 6 on 5-1/2 inches.
The disc brake kit will work on a torsion axle if it has a 5-bolt brake mounting flange welded to the spindle. The brake mounting flange would be like the Redline Brake Mounting Flange, part # 4-44-1. This flange has a bolt pattern of 5 on 3/7/8 inches, which will accept the caliper mounting brackets in the Kodiak disc brake kit # K2HR526DS.
I do not carry any torsion or leaf spring axles at this time.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet and Stainless - 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Q&A: How To Install The Plug-And-Play Hydrastar Vented Marine Electric Over Hydraulic Actuator
- Q&A: Can A Yakima BaseLine Roof Rack Carry A Kayak At Highway Speeds?
- Q&A: Recommended Disc Brakes for a Dexter 4,400 lbs Axle
- Q&A: Do the Hydrastar Disc Brake Kits Include Kodiak Brakes?
- Q&A: Replacement for Transcom 21334TC and 2133TB
- Q&A: Option For Replacing Tie Down 46304 Cailpers
- Q&A: Recommended Brakes and Replacement Hub & Drum Assembly for a 2013 Forest River Sandstorm TT
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Bleed Your Trailer Surge Brakes
- Article: The Best Boat Bumpers