Could 5-Way of 5-Way to 7-Way Adapter be Removed and Wired to Trailer Wiring
Updated 06/02/2017 | Published 06/01/2017
Question:
I have a 5 pin flat boat trailer wiring harness and I have to use the converter to the 7 pin to fit my F350 to tow it. Can I match up the colors of wires from the 5 pin flat to the function on the 7 pin round and do away with the 5 pin? Thank you
asked by: Mark V
0
Expert Reply:
Yes, if you wanted to just remove the 5-pin on your trailer as well as on your adapter you could wire the 7-way left over to the wiring of the trailer.
If the colors are the same on the trailer wiring side as what the pins correspond to on the adapter's wiring then you could match them color by color.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Adapter 7 Pole to 5 Pole Flat Wired Adapter
- Custom Fit Vehicle Wiring
- Wiring Adapters
- Universal Fit
- 7 Blade to 5 Flat
- Plug and Lead
- Optronics
more information >
Continue Researching
- Q&A: Is etrailer Still Carrying Draw-Tite Hitches
- Q&A: Will Optronics Trailer Connector w/ Coiled Cord 7-Way Round to 5-Pin Delphi Replace Malibu 6832001.1
- Article: How to Fix a Bad Trailer Ground
- Q&A: Solution for Reverse Lockout on Demco DA70 Actuator
- Q&A: Comparing Bypass and Non-Bypass Electric Reverse Lockout Solenoids for Surge Couplers
- Q&A: Replacement Jack that Fits the Weld On Mounting Bracket for Fulton F2 Jacks
- Q&A: Replacing 5-Way on Trailer that Has 8 Wires
- Q&A: Replacing 5-Way of Trailer that Has Two White and Brown Wires
- Article: Redarc Tow-Pro Elite Full Review
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)