Ventlilne Ventilator Crank Arm Replacement And Cover

Question

Question:

On my current ventilator, the crank arm is attached to the cover with what looks to be a rivet. If just replacing the cover, does this rivet have to be drilled out if I want to attach the new cover to the existing crank arm? A bolt/nut is then needed to attach the new cover to the arm? See attached pix.

asked by: Duane

1

Helpful Expert Reply:

For your application, the part that is broken is actually part of the crank arm assembly. You will want the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome # BVD0462-00 as that part is not a replacement option. This is to be used with the Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - White - Wedge Shape - Plastic # BVD0449-A01 if you choose to replace the cover as well.

expert reply by: Jason S

1

click to enlarge

Answer 1

There is not a cross-reference to specify the exact vent lid that you need. I can tell you that there are not any 13" X 13" vents. Your dad probably measured the inside narrowest part of the vent. Universally the vent openings on the roof…

view full answer...

Answer 2

Since your 1986 Holiday Rambler Alumalite has the Replacement Dome Assembly for Ventline Ventadome #BVD0449-A01 on it, that means that the following Trailer Roof Vents will fit: The Ventline Ventadome Trailer Roof Vent #V2092SP-28 has a manual lift…

view full answer...

Answer 3

If the old vent lid you have matches the shape of the #BVD0449-A01 and the hinge style then this is for sure the correct replacement part you need. I attached a picture that shows what the hinge looks like as well as a link to an install video for…

view full answer...

Answer 4

We do have most of the parts that you referenced and although we don't have instructions we do have some diagrams on each of the product pages that you can check out. Item 7 - #VC0476-00 Item 14 - #BV0115-04 We don't have items 1, 15 and, 16,…

view full answer...

Answer 5

For your Ventline Northern Breeze V2525, we have the: -Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents #BV0554-01 for white. -Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents #BV0554-03 for smoke. Or -Vent Cover for…

view full answer...

Answer 6

We carry a broad range of Ventline products, complete vent assemblies as well as individual replacement parts, for both of the part numbers you referenced. For Ventline item V2092 we offer complete vent assemblies, #V2092SP-29 in smoke color and…

view full answer...

Answer 7

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 8

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Ventlilne Ventilator Crank Arm Replacement And Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching