Parts Needed to Flat Tow 2017 Subaru Crosstrek  

Question:

Expert Reply:

First you need a base plate that is confirmed to fit your 2017 Subaru Crosstrek. For that we have the Roadmaster part # 52922-1A that fits the manual transmission models of the vehicle like yours.

This would work well with the Sterling tow bar part # RM-576 which is one of the nicer tow bars available. This comes with safety cables as well.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. One of the easiest systems to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles. You will also need # RM-9332 for installation.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by: Jameson C

0