Ventline RV Screen Replacement Availability for Roof Vent

Question

Question:

I need a replacement screen for the old model #544 bathroom vent with a fan. Its 13.25inch square and about 1/4inch thick - it sits inside the frame, flush with the surface. Do you still have these?

asked by: Pat M

0

Expert Reply:

We have two possible solutions that you will need to compare to the roof vent of your trailer. We have the part # BVC0573-31 and the part # BVA0444-32 which both fit Ventline roof vents that match the dimensions you listed. You would need to check out the pictures of both and see which one matches what you have.

expert reply by: Jameson C

0

Answer 1

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement lid #BVD0449-A01, and the replacement ceiling garnish #VA0445-28 all available for…

view full answer...

Answer 2

The Off White Ceiling Garnish #FVK1060-80 will fit your application perfectly. It has the 6" leg that you'll need to cut down to fit your 5-1/4" application but aside from that everything else will match up perfectly. If you need a…

view full answer...

Answer 3

The Ventline Ventadome VD0434 uses the screen part #BVD0434-31, the frame part #BVA0444-32, and lid part #BVD0449-A01 or part #BVD0449-A03.

view full answer...

Answer 4

We do carry a wide assortment of trailer vents and vent replacement parts. You can see Ventline brand screen product on the linked page. Screens are available in various colors for both their fan-powered vents as well as their manual types. You can…

view full answer...

Answer 5

For the roof vent screen you sent us a picture of the correct replacement is the part #BVA0444-32 and you'd be set. Must have been very hot to melt that old one!

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Ventline RV Screen Replacement Availability for Roof Vent

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching