Needing a Draw Bar to Fit the Curt Trailer Hitch # C 11327 on a 2004 Honda Accord

Updated 04/24/2017 | Published 04/22/2017

Products Featured in This Question

Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs

(2282)

$43.83

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(64)

$219.43

1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs

(3914)

$12.89

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs

(3914)

$10.68

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(126)

$41.48

Loctite Bulb, Lamp, and Electrical Connection Dielectric Grease - 0.33-Oz Tube

(133)

$9.22

Question:

I plan on installing the # C11327 hitch onto my Honda Accord 2004 with the intent of light towing. I know I need a lighting rig- so I ed # C55502. I also need a tow bar and a ball mount- I have balls, but need the bar. The hitch says it is 1 1/4th- does that mean I get a 1 1/4th tow bar, or the 1 1/8th tow bar # C45520? I saw in an answer to a question this tow bar, but Im not sure if it is the right size given the different numbers. Thanks!

asked by: Anthony

Expert Reply:

The Curt Draw Bar # C45520 is an 1-1/4 inch draw bar that will fit the 1-1/4 inch receiver opening on he Curt Trailer Hitch, # C11327 that fits the 2004 Honda Accord.

The Curt draw bar will hold a ball that has a 3/4 inch shank diameter. if you need a ball that has a 3/4 inch shank, then for an 1-7/8 inch ball use # C40001 and for a 2 inch ball use # C40018.

The Curt T-One Connector # C55502 is the confirmed trailer wiring harness for he 2004 Honda Accord Sedan. I recommend when installing the wiring harness to use # LT37534 Dielectric Grease in the plugs to guard against water and dire contamination that could interrupt your trailer light signal.