Pintle and Hitch Ball Combo Hook Recommendation
Question:
I am looking for a double sided ball hitch with 2 5/16inch and 2inch sizes, That also incorporates a pintle hitch and id easily adjustable up and down to accommodate different trailer heights. It must be rated for 14K lbs or more.
asked by: Clintm
0
Expert Reply:
The best option we have is the part # PH1 this is a combination pintle hook with all three common hitch ball sizes. 1-7/8, 2 and 2-5/16 inch.
The pintle section has a 25k capacity but the balls have a considerable lower capacity at 10k for the two larger ball sizes and 3,500 for the smallest.
You would also need the adjustable mounting plate # AMPC3.
expert reply by: Jameson C
0
Products Referenced in This Question
Convert-A-Ball Cushioned, Adjustable Pintle Mounting Bar for 2" Hitches - 10 Holes - 10,000 lbs
- Pintle Hitch
- Pintle Mounting Plate
- 10000 lbs GTW
- 2 Inch Hitch Mount
- 10 Holes
- Cushioned Shank
- Convert-A-Ball
more information >
Product Page this Question was Asked From
Convert-A-Ball Pintle Hook Combo with 3 Stainless Steel Balls - Bolt On - 25,000 lbs
- Pintle Hitch
- Pintle Hook - Ball Combo
- Three Ball
- 25000 lbs GTW
- Plate Mount
- Bumper Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- No Shank
- Convert-A-Ball
more information >
Similar Expert Q&A Pages
- Compatibility of 2-1/2-Inch Diameter Lunette Ring with Convert-A-Ball Pintle Hook Combo PH1
- Is it Normal for Pintle Hook Towing Setup to Make Noise When Starting/Stopping
- Adjustable Pintle Hitch With Quick Change Balls
- Recommended Pintle Hook Hitch Ball Combo And Adjustable Height Mounting Plate For 2006 Jeep Liberty
- Slack When Towing with Convert-A-Ball Pintle Hook Combo
- What are the Dimensions of the Convert-A-Ball Pintle Hook Combo # PH1
- Hitch Mounting Plate Compatible with Convert-A-Ball Pintle Hook Combo
- What Size Bolts are Used to Mount Convert-A-Ball Pintle Hook Combo # PH1
- Recommended Pintle Hook -Ball Combo For Use With Rectangular Ball Receiver
- Recommended Pintle Hook Mounting Plate for 2-1/2 Inch Trailer Hitch Receiver
- Replacement Shank For The Convert-A-Ball Pintle Hook Combo Part # PH1
- Pintle and All Three Hitch Ball Size Ball Mount Availability
- Adjustable 3 Ball Mount With Pintle Hitch For a 2-1/2" Receiver
- 2 5/16' Bolt On Pintle Hitch with the Highest Capacity
- Is there a Convert a Ball Hitch with Pintle Hook and 2 inch ball Capabilities Available?
- Ball Mount with Pintle Attachment, 2 Inch Ball, and 2-5/16 Inch Ball
- Can Gen-Y Receiver Plate # 325-GH-724 be Mounted Only Using the Top 4 Holes
- Hitch Ball Solution that Allows Use of all Three Hitch Ball Sizes
- Pintle Hitch Ball Mount Rated for Over 20,000 Pounds for 2-1/2 Inch Trailer Hitch
- What Amount of Drop is Provided by Convert-A-Ball Cushioned Pintle Mount for 2-Inch Hitches # AMPC3
- Recommended Pintle Hitch Made with USA Steel
- Compatibility of Pro Series Adjustable Pintle Hook 63072 with Convert-A-Ball Pintle Hook Combo PH1
- Recommended Pintle Hitch/Hitch Ball Combination For 20,000 lbs. Towing Capacity
- Recommended Hitch and Pintle Setup for Use with 2" Hitch Ball on 2019 Ford F-250
- Where Does Replacement Pintle Sleeve for Convert-A-Ball Pintle Hook Combos Item # PS Install
- Can a 2 Inch Ball be Installed on Pintle Hook Combo # 63012
- Replacement Sleeve for Convert-A-Ball Pintle Hook Combo