Will The Curt Trailer Hitch Receiver For A 2017 BMW X3 Interfere With Hands Free Lift Gate?  

Question:

Expert Reply:

For your 2017 BMW X3, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13316 should not have any interference with the kick opening feature of the rear tail gate. I reached out to my contact at Curt to confirm they have not had any issues with interference. This installation will require a plastic rivit gun from a local hardware store and some trimming of the underbody but not the fascia. Relocation of the sensors if needed for a different hitch is not very difficult, but will take some willingness to modify your vehicle slightly.

For your vehicle trailer wiring if you will be towing with this receiver, I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 if you don't mind splicing into your factory wires. If you don't wish to do that, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This harness uses zero contact interface sensors to capture the signal in the wires without tapping into them. Either system will use a battery power wire to protect the vehicle wiring by drawing power from the battery. The ZCI will also protect your vehicle warranty.

For a ball mount, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black # BWTS10037B. This adjustable ball mount will allow you to tow your trailer level and will give you both a 2 inch and a 2-5/16 inch hitch ball option. This ball mount has a very cool stowable feature to protect your shins and give your vehicle a clean look when not in use.

expert reply by: Jason S

0