Which Over Under Axle Kit for Big Tex Trailer with 3,500 lb Axles
Updated 03/28/2017 | Published 03/27/2017
Products Featured in This Question
Question:
I have a big tex trailer and id like to flip the axle. I heard you guys carry a kit to do it. I looked for it on your website but couldnt find it. Its a 3500lb single axle trailer. Thanks
asked by: Robert
Expert Reply:
The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.
Since you said you have 3,500 lb axles you are going to have the 2-3/8 inch axle diameter most likely. Still measure to be sure though.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Axle Flip Kit for Big Tex 35ES Single Axle Utility Trailer
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Video: Complete Breakdown of the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Search Results: b&w
- Search Results: axle flip kit
- Shop: Towing Mirrors
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2.5" Hitch - 16K GTW, 1.6K TW
- Shop: Trailer Hitch
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Ark Drop Down Corner RV Stabilizer Jacks - 24" Long Corner Steadies - Silver - Qty 2
- Shop: etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin
- Shop: Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs - Qty 1
- Shop: Demco Trailer Stake Pocket Spare Tire Mount - Black
- Video: Stabilizer Jacks Review
- Video: A Closer Look at the Dexter Trailer Springs Over-Under Conversion Kit
- Video: Feature Breakdown: InfiniteRule Lock for Demco eZ-Latch Trailer Couplers
- Video: etrailer Surge Brake Coupler Lock Review
- Search Results: 5/16 coupler pin lock
- Search Results: coupler lock
- Search Results: tongue tool box
- Search Results: tounge box
- Search Results: tongue jack block
- Article: How to Raise Your Travel Trailer Height
- Q&A: How To Get Full 2-1/4" Lift With Correct Track Trailer Alignment and Lift Kit For Tandem Axle RR23QX
- Q&A: How to Raise a 5th Wheel Trailer so it Rides Level
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Q&A: Replacement 3,500 lbs Axle for a Dexter w/a 93" Hub Face and 80" Spring Seat Spacing
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
on Trailer Suspension Parts
