Does CE Smith Deep V Keel Roller CE10403G Have a Weight Capacity
Updated 03/28/2017 | Published 03/27/2017
Question:
My 2120 Robalo weighs in at 3500 lbs. Will these rollers stand up to that weight? I will put a 12 in at the back, and two 8 inch on the keel 6 feet apart. The trailer is a tandem all aluminum.
asked by: Richard H
Helpful Expert Reply:
The rubber keel roller # CE10403G does not have a weight capacity though it is designed to support the added weight of heavier boats. At any given time, it is not likely that any one roller will have to support the entire weight of the boat so it is not really a concern. If you are replacing a roller then the key is to get one that is the same size as the previous roller.
Product Page this Question was Asked From
CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 8"
- Boat Trailer Parts
- Rollers
- Keel Roller
- Rubber
- 8 Inch Long
- CE Smith
more information >
Continue Researching
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Q&A: What Size Lag Bolts do I Need to Swap Out Bunk Boards on 20 Foot Bass Boat?
- Q&A: Can the Yakima Holdup # Y02433 Be used with Bikes that Have Fenders
- Q&A: Recommended Roller Bunks Replacement for Wooden Bunks for G3 1860 Boat
- Q&A: Can Bunk Boards Longer Than 69-1/2" be Installed on a Boat Trailer
- Q&A: How Long of Lag Bolts Should I Use w/ the CE Smith Bolster and Swivel Bracket Assemblies?
- Article: Trailer Tire Sizing
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure a Trailer Axle