Possible Bearing Kit for Spindle that's Almost 1 inch in Diameter
Updated 03/21/2017 | Published 03/20/2017
Question:
I have a metric axle its almost one inch. Need 2 races , 2 seals and 2 bearings...
asked by: Bearings
0
Expert Reply:
Sounds like you have a spindle that's almost 1 inch in diameter. The BT8 spindles are .99 inch in diameter where the bearings ride. Where the seal rides is 1.24 inches in diameter. If that matches what you have that would mean you need the bearing kit # BK1-100.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Will Malone Spare Tire Carrier MPG465 Work With The Malone LowBed MicroSport Trailer MPG464-LB?
- Q&A: Parts Needed To Add Electric Drum Brakes To Boat Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Bearing Buddy and Bearing Kit for Malone Microsport Low Bed Trailer
- Q&A: Replacement Bearing and Seal Kit with Grease for a Malone MicroSport Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Trailer Wiring Diagrams
- Q&A: Timken Bearings, Races, Seals and Caps For a Lippert 3,500lb Trailer Axle
- Article: Trailer Tire Sizing
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Lighting Requirements