Will Draw-Tite Fifth Wheel Trailer Hitch Fit into Reese Industry Standard Rails

Question

Question:

I see the Reese is universal, Does that mean a Drawtite 5th wheel will mate up to it?

asked by: Bryan

0

Expert Reply:

Many fifth wheel hitches fit into industry standard rails that are installed in the truck's bed. As long as a hitch is designed for the industry standard rails then it will be a universal fit.

The rails are installed in the truck's bed and connected to the frame underneath using brackets. The Reese bracket and rail kit that is custom designed for your 2007 Ford Super Duty is # RP50082-58. This will install much faster and require a lot less drilling than a universal bracket kit like # RP30035.

expert reply by: Charles S

0

Answer 1

Replacement hardware is available. You will need part #RHK. Once on the product page, just type in the Hitch Item Number in the box on the right. Then use the pull down menu below that to select the manufacturer. Then just click the Add to Cart…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Since you don't have the wiring harness on your previous RV water heater you most likely had an all propane powered unit. The Atwood RV Water Heater w/ Heat Exchange - Gas and Electric - Automatic Pilot - 8,800 Btu - 6 Gal #AT96163 is powered by…

view full answer...

Will Draw-Tite Fifth Wheel Trailer Hitch Fit into Reese Industry Standard Rails

Featured Help Information

Miscellaneous Media

Continue Researching