bing tracking image
Q & A Icon

Does my 2007 Coachmen Mirada Already have Wiring Installed for Brake Controller  

Updated 02/03/2017 | Published 02/02/2017

Question:

Is a 2007 Mirada already wired for a brake controller

0

Expert Reply:

To find this out you will need to either consult your owners manual or simply look around the dash and the steering column on the drivers side of your Mirada for a loose wiring harness. The Prodigy P3 # 90195 brake controller is one of our most popular choices and is an excellent choice. If you have the wiring harness on the vehicle end, then all you have to do is use an adapter, part # 3035-P, to connect the Prodigy P3 to your wiring harness. If you don't have the wiring then you will need to splice your connections.

If your Mirada doesn't have the 7-way installed at the rear you can use the Installation Kit # ETBC7 for that, but you will want some additional wiring, like part # 10-2-1 to run the brake wiring from the front of your Mirada to the 7-way at the rear.

I have attached some demonstration videos for you as well.

expert reply by:
0
Jon G

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching