Compatible Trailer Hitch Receiver to Fit 2017 Honda Civic Hatchback

Published 12/21/2016

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(29)

$424.33

Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1

(672)

$17.20

1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs

(347)

$34.76

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs

(347)

$39.34

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2289)

$47.75

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

(1877)

$87.94

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2955)

$3.52

Question:

So you have a Trailer hitch receiver that will definitely fit the new 2017 civic hatch ex model. I checked earlier and there were none available. I holding off purchasing an new civic until Im sure one is available.

asked by: Randy G

Expert Reply:

The Curt # C11463 has been confirmed to fit the new 2017 Honda Civic, both the coupe and hatchback. This is a Class I hitch receiver rated for 200 pounds max tongue weight and 2,000 pounds max towing weight. Also, according to Curt's warranty, a support strap, like part # 18050, must be used to secure any non-trailer loads like a bike rack or cargo carrier.

If you plan to tow a trailer with your Civic the wiring harness for the hatchback is part # C59236. This is a universal harness but will give you a 4-way trailer connector to power the trailer's lights.

For a ball mount, the Curt # C45521 will give you a rise of 2-5/8 inches or a drop of 3-1/4 inches. Then for a 2 inch hitch ball use # A-82 and for a 1-7/8 inch ball use # A-80. Finally, for a pin and clip you can use # F-4.