Should Trailer Slipper Spring have the Slipper End Point Towards the Front or Rear of a Trailer
Updated 12/19/2016 | Published 12/17/2016
Question:
When installing slipper type leaf Springs does the slipper end go towards the rear or the front of the trailer ?
asked by: John C
1
Helpful Expert Reply:
On a trailer slipper spring the slipper part goes towards the rear of the trailer. I have included a link to our help article all about slipper spring suspension for you that should also help.
expert reply by:
Michael H
1
click to enlarge
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Trailer Leaf Springs Rated Slightly Higher Than 4,400 lb Axle
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Recommended 25-1/4" Leaf Springs w/ 4 Leafs for a 5,000 lbs Axle
- Q&A: Replacement Leaf Springs and MORryde X-Factor Crossmember for 2021 Grand Design Imagine 2400BH
- Q&A: Replacement Leaf Springs for 2021 Keystone Raptor Toy Hauler
- Q&A: Replacement Leaf Springs for a Vintage Camper
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Raise Your Travel Trailer Height
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups