Kit for Moving Axles Above Leaf Springs on Boat Trailer

Updated 12/12/2016 | Published 12/11/2016

Products Featured in This Question

Dexter Trailer Springs Over-Under Conversion Kit

(850)

$82.90

Dexter Trailer Springs Over-Under Conversion Kit

(850)

$90.89

Question:

I have a axle that is mounted under my springs.Can I get a v axle and mount it on top.This is a aluminum boat trailer with a deep v hull .2 3500 pound axle thats whats on the trailer know.Thanks

asked by: Guy

Expert Reply:

The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.

Some refer to this process as "flipping the axles," but since axle has a slight bow to it you can't just flip them and reinstall them under the springs using the same spring seats. You have to install new spring seats on the opposite side of the axle so that it can be moved below the spring.

expert reply by: Jameson C