How to Determine Towing Capacity 2003 GMC Envoy 4-Wheel Drive with 6 Cylinder 4.3L Engine

Question

Question:

I have a 2003 GMC Envoy 4WD. Engine is a 4.3 inline 6 24 valve dohc. I was wondering what the max towing capacity would be...Thank you....

asked by: Anthony M

0

Expert Reply:

According to the research I conducted, there were 4 different models of the 2003 GMC Envoy with 4-wheel drive. Both the SLE and SLT have a towing capacity of 5,200 pounds, 6,200 with weight distribution.

The XL SLE and XL SLT models have a towing capacity of 4,800 pounds, 7,000 pounds when using weight distribution. All of the models seem to be rather capable vehicles. You should also be able to find the towing capacities of your specific vehicle in the owners manual.

I have included a link below to our weight distribution FAQ article that explains what weight distribution is and the various components involved.

expert reply by: Michael H

0

June

2/7/2013

Hi, Michael, can you send the link for the weight distribution FAQ article? I didnt see it. Thank you!

Patrick B.

2/15/2013

Here it is.

Helpful Links

faq-weightdistribution.aspx

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Thanks for your question, Brandon. We have everything you need. There are two different options depending on what wiring is already on your van. The first option is if your van already has a 4-flat connector at the rear. If it does, you would need…

view full answer...

Answer 7

There are a few differences between the Universal Installation Kit part #ETBC7 and the 7-Way RV Upgrade Kit part #ETBC7L. The biggest one is that part #ETBC7 comes with both the power and brake output wire you will need to run to the cab/battery…

view full answer...

Answer 8

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 9

Hey Randy thanks for the information! Here are the parts you'll need to add a brake controller to your 2006 Dodge Ram 1500 with a factory 4-Way connector: Brake Controller and Custom Fit Wiring Harness - Curt TriFlex NEXT item #C43GV 7-Way…

view full answer...

How to Determine Towing Capacity 2003 GMC Envoy 4-Wheel Drive with 6 Cylinder 4.3L Engine

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching