Why Does Curt Ball Mount part # C45112 Have Higher Capacity in Drop Position
Published 09/21/2016 >
Question:
Why does the towing capacity and tongue weight change when using the hitch in the rise position rather than the downward position?
asked by: Mike H
Helpful Expert Reply:
If you look at the support bracket that is welded behind the ball mount platform of the Curt Ball Mount part # C45112 it provides more support in the drop position than in the rise. When in the drop position the bracket works to support ball mount and it's mainly the metal of the bracket that is doing this.
When in the rise position that bracket is really only adding the strength of the welds of the bracket to prevent it from bending down. That's why it has a higher capacity in the drop position.
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 8" Rise, 9-1/4" Drop - 14" Long - 5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- Steel Shank
- Drop - 9 Inch
- Rise - 8 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Threaded Hole on the Ball Retainer for on the Weigh Safe 180 Hitch 2-Ball Mount WS34MR?
- Q&A: Recommended Grease Seals For Dexter 9919860 3,500lb Axles
- Q&A: Dimensions of the Curt Hitch part # C15800
- Article: RV Pre-Departure Checklist
- Q&A: Options for Sway Control on a Hitch That Cannot Use Weight Distribution
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Increase Height of Trailer Hitch Ball to Allow Boat Trailer to be Towed Level
- Q&A: What is the Bolt Pattern for the Buyers Products PH50 Pintle Hook?
- Q&A: Availability of 14 inch Trailer Wheel with 4 Bolt Pattern
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Raise Your Travel Trailer Height
- Article: Must-Have Flat Towing Components
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)

