How to Measure Length of Double-Eye Trailer Leaf Spring e28SR
Updated 08/30/2016 | Published 08/29/2016 >
Question:
how do you measure the length center of hole to center of hole
asked by: Don S
Expert Reply:
Yes, a double-eye leaf spring like # e28SR is measured from the center of one hole to the center of the other when the spring is not under tension. If a spring is installed in the trailer suspension it will tend to measure a bit differently.
Also, springs that are very old and well-worn will tend to measure a bit longer than they were when new. So for example if you pull an old spring from your trailer and find it measures 26-inches eye to eye, then it is quite possible that when new it was a 25-1/4-inch spring like # e28SR.
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Double Eye Spring for 5K Trailer Axles - 25-1/4" Long - Dacromet
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushing
- 5000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Marine Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer suspension parts
- Search Results: 8000 lb axle
- Search Results: accessories and parts
- Video: Dexter E-Z Flex Suspension Kit DIY Install - 2022 Grand Design Imagine Travel Trailer
- Shop: RV Interior Lighting
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Q&A: Can You Use 8,000 Lb Wheel Bearings on a 7,000 Lb Trailer Axle
- Q&A: Recommended Replacement Leaf Springs For Fifth Wheel Trailer
- Q&A: Can 6K Springs be Upgraded to 7K Springs on a Grand Design 320X
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: Double-Eye Trailer Suspension System Review
- Video: Installing the MORryde Shock Absorbing Suspension Equalizers on a 2024 Grand Design Imagine Travel T
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: 3" Round Trailer U-Bolts 9/16" Diameter (Qty 2)
- Shop: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
- Shop: RV Jack Pads
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Video: Ultimate Overview of the Dexter Fortress Threaded Aluminum Oil Cap for 5.2K to 8K Axles
- Video: Set up: Dexter E-Z Flex Suspension Kit on a 2020 Grand Design Reflection 150 Series Fifth Wheel
- Video: How to Install the MORryde Suspension Upgrade Kit on a 2018 Grand Design Momentum 5W Toy Hauler
- Video: MORryde Shock Absorbing Suspension Equalizers Installation Guide - 2022 Grand Design Imagine XLS Tra
- Video: Installation Guide for the CE Smith U-Bolt Kit - 2020 Grand Design Momentum 5W Toy Hauler
- Q&A: How Does Trailer Leaf Spring Get Measured to Pick Out Replacement
- Q&A: How to Measure a Trailer Leaf Spring
- Q&A: Best Suspension Upgrade Between MORryde, Equa-Flex, and Road Armor for Tandem Axle Trailer
- Shop: Nerf Bars - Running Boards
- Shop: Trailer Hub and Drum Assembly for Lippert ABS System - 8K Axles - 12-1/4" - 8 on 6-1/2


