How to Measure a Trailer Leaf Spring
Updated 10/17/2015 | Published 10/16/2015 >
Question:
how do you measure the leaf spring for what Lenght needed straght across to eye to eye or the bend eye to eye
asked by: Randy
Helpful Expert Reply:
To measure for the correct leaf spring length, you should jack up the trailer so that the axle hangs free, then measure straight across from the center of one eye to the center of the other eye. Because springs tend to flatten out as they wear, this the best way to get an accurate measurement.
Each of our product pages for the leaf springs shows a diagram showing the width and height of the spring.
If you click the provided links, you can see the double eye leaf springs we offer as well as an FAQ article about trailer suspensions.
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushing
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer suspension parts
- Search Results: 8000 lb axle
- Search Results: accessories and parts
- Video: Dexter E-Z Flex Suspension Kit DIY Install - 2022 Grand Design Imagine Travel Trailer
- Shop: RV Interior Lighting
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Q&A: Can 6K Springs be Upgraded to 7K Springs on a Grand Design 320X
- Q&A: Can You Use 8,000 Lb Wheel Bearings on a 7,000 Lb Trailer Axle
- Q&A: Recommended Replacement Leaf Springs For Fifth Wheel Trailer
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Installing the MORryde Shock Absorbing Suspension Equalizers on a 2024 Grand Design Imagine Travel T
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Shop: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
- Shop: 3" Round Trailer U-Bolts 9/16" Diameter (Qty 2)
- Shop: RV Jack Pads
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Video: Installation Guide for the CE Smith U-Bolt Kit - 2020 Grand Design Momentum 5W Toy Hauler
- Video: Set up: Dexter E-Z Flex Suspension Kit on a 2020 Grand Design Reflection 150 Series Fifth Wheel
- Video: How to Install the MORryde Suspension Upgrade Kit on a 2018 Grand Design Momentum 5W Toy Hauler
- Video: MORryde Shock Absorbing Suspension Equalizers Installation Guide - 2022 Grand Design Imagine XLS Tra
- Video: Ultimate Overview of the Dexter Fortress Threaded Aluminum Oil Cap for 5.2K to 8K Axles
- Q&A: How to Measure Length of Double-Eye Trailer Leaf Spring e28SR
- Q&A: Best Suspension Upgrade Between MORryde, Equa-Flex, and Road Armor for Tandem Axle Trailer
- Q&A: How Does Trailer Leaf Spring Get Measured to Pick Out Replacement
- Shop: Nerf Bars - Running Boards
- Shop: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle



