What PSI Should be Ran in Trailer Tires that Have Different Load Ranges
Published 08/05/2016
Question:
I have a category d and e tire on my boat trailer What psi should I use?
asked by: Xeb
0
Expert Reply:
For trailer tires you want to always use the max pressure that is listed on the sidewall of each tire. Doing so ensures that you get the max capacity for the tire.
Now ideally you wouldn't be running two different Load Ranges on your trailer since that means you would run different PSIs in each tire. But still you would want to run the max PSI in each until you can get all of the tires matched.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 4.80-12
- 12 Inch
- K - 65 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Looking for Taskmaster Wheel and Tire in Size 4.80R12 5 Lug Bolt Pattern
- Q&A: Looking For 4.80-12 Tires That Have A Speed Rating Higher Than 55 mph
- Q&A: Choosing Between Radial and Bias Ply 4.80-12 Tires for Highway and Off-Road
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: What 4.80-12 Tire on Galvanized Wheel do You have for My Boat Trailer Used on Sometimes Saltwater?
- Q&A: Will Caliber Marine Slides Hold 5,000 lb Boat
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Article: Most Popular Wheel Bearings