Parts Needed to Move Axles of 1999 Alpenlite Riviera 29rk Below Leaf Springs

Published 07/08/2016

Products Featured in This Question

Dexter Trailer Springs Over-Under Conversion Kit

(850)

$82.90

Dexter Trailer Springs Over-Under Conversion Kit

(850)

$88.08

Question:

Hi I have a 1999 Alpenlite Riviera 29rk and its currently too low to tow with my truck so I am going to have to put the axles under the leaf springs to lift the trailer for it to ride level when on the truck, do you guys make a kit for this? And do my axles have a bow in them to compensate for the weight of the trailer on them?

asked by: Justin M

Expert Reply:

What you are in need of is an over-under axle kit for your 1999 Alpenlite Riviera 29rk.

The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.

Some refer to this process as "flipping the axles," but since axle has a slight bow to it you can't just flip them and reinstall them under the springs using the same spring seats. You have to install new spring seats on the opposite side of the axle so that it can be moved below the spring.

expert reply by: Jameson C