4-Pole Wiring Extension for Peterson Tow Light Kit PE26UR
Updated 06/09/2016 | Published 06/08/2016 >
Products Featured in This Question
Question:
any way to get this with 30foot of wire? or would I just have to splice in additional length?
asked by: Ray D
Expert Reply:
If you want to add 10-feet of additional 4-pole wiring to the Peterson Magnetic Tow Lights # PE26UR you can simply use a 4-pole extension cable. This will avoid the need to cut and splice the lights' wiring harness. Hopkins offer 10-foot extension # HM48235 that will plug right in.
I suggest you apply some dielectric grease like # 11755 to the connection point and secure the two mating connectors with a zip tie.
Product Page this Question was Asked From
Universal Magnetic Tow Lights - Red LEDs - 20' Wiring Harness with 4-Way Flat Trailer Connector
- Flat Tow Wiring Harness
- Bypasses Vehicle Wiring
- Removable Tail Light Kit
- Universal Fit
- 4 Flat
- Peterson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Must-Have Flat Towing Components
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Q&A: Complete Flat Towing Setup for a 2026 Ram 2500 Behind a Motorhome
- Q&A: Is the Replacement Wheel # DM11574 from Demco the OEM Wheel for the Kar Kaddy SS Tow Dolly
- Q&A: Parts Needed to Flat Tow a 2013 Chevrolet Sonic Sedan Automatic Behind a Motor Home
- Q&A: Replacement Wheel for Demco Kar Kaddy That Is Not Chrome
- Q&A: Troubleshooting Demco Kar Kaddy that Doesn't Track Behind Tow Vehicle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Flat Tow Set Up For a 2026 Jeep Wrangler
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Hitch Installation Tips
- Article: Can You Flat Tow a 2025 Cadillac Escalade?



