Replacement Hub Recommendation for a 2000 Shorlander Model SD v 1831

Updated 04/27/2016 | Published 04/24/2016

Products Featured in This Question

Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased

(400)

$99.95

Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased

(115)

$109.24

Question:

Need to replace wheel hub assembly Bolt pattern 4 1/2 inch X 5 Can you recommend parts needed. My application does not require brakes. 2000 Shorlander model SD v 1831 Thanks

asked by: Rob B

Expert Reply:

I pulled up the manual from your boat trailer and was able to find out that your trailer has an 84 spindle on it which means we have a hub that will fit.

For an idler hub that would fit your hub that has a 5 on 4-1/2 inch wheel bolt pattern you would want the Dexter Hub part # 84545UC1-EZ. If you have a 6 on 5-1/2 inch bolt pattern you would want the Trailer Hub Assembly part # 84655UC1-EZ.

If you are unsure of what bolt pattern you have check out the FAQ article I attached determining bolt patterns.

expert reply by: Jameson C