Replacement Trailer Hub with Inner Bearing L44643 and Outer L44649 with 5 on 4-1/2 Bolt Pattern
Updated 04/20/2016 | Published 04/19/2016
Question:
I am looking for new hubs for my utility trailer. Its a 5 on 4.5 lug and the INNER bearing is L44643 and the OUTER bearing is L44649, which matches nothing you have online. Can you help me?
asked by: Charles H
0
Expert Reply:
Actually the Dexter Hub part # 8-259-50 uses the same bearings you have and would work well for you. This also has the 5 on 4-1/2 inch bolt pattern you need as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Trailer Hitch Recommendation for 2025 Subaru Outback Wagon
- Q&A: Where Do I Plug In Curt T-Connector C56040 On A 2025 Subaru Forester Hybrid?
- Q&A: Recommended Hitch for a 2025 Subaru Forester Hybrid
- Q&A: Availability of Custom Wiring Harness for 2026 Subaru Forester
- Q&A: Correct Replacement Trailer Idler Hub for Triton Snowmobile Trailer with Dexter Torsion Axle
- Q&A: Need Trailer Hitch For 2025 Subaru Forester Hybrid
- Q&A: Why Does 4-Pin Trailer Wiring Have 5 Wires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tire Sizing
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide