Fit and Compatibility of Upgraded Hubs on a 84 Eager Beaver 9 Ton Tri Axle Trailer
Updated 03/10/2016 | Published 03/09/2016 >
Products Featured in This Question
Question:
Im looking for a hub and drum to replace my dayton hub on my 84 Eager Beaver 9 ton triaxle with dexter axles. It has 25580 inner bearings and 15123 outers. Id like 9/16 studs. Will a new hub with 14125a outer bearings work? Such as the 8-219-13UC3? Thanks
asked by: Alex L
Expert Reply:
Yes, the # 8-219-13UC3 will fit onto your 84 Eager Beaver 9 ton tri axles.
Your old outer bearing # 15123 has the same inner diameter as the # 14125a on the 9/16 stud # 8-219-13UC3 hub. Some important things to know about this new hub compared to your old ones is that the bolt pattern will change from a 6 on 5-1/2 to 8 on 6-1/2 bolt pattern. Also the bearings you will need to use will be different, even though they will both fit the spindle the new hub will require the use of the new # 14125a bearing. The outer bearing will remain the same # 25580 but you must use the # 14125a inner bearing. The larger hub and thicker studs will not increase the weight rating of your axle, so you will still be restricted to 18,000lbs on your Eager Beaver. If you were looking to increase your weight capacity you would want to upgrade to a heavier rated axle.
If you are in need of new tires and wheels to accommodate this new bolt pattern, I have linked the page of all the ones we offer for your convenience.
Product Page this Question was Asked From
Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Tire Chains
- Q&A: Installation of Lippert Components Universal Slide Out Wear Pads
- Article: Trailer Wiring Diagrams
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Q&A: RV Replacement Fridge Recommendation for Dometic RM2451
- Q&A: Which Leaf Spring Is The Best Replacement For A Bouncy 2019 Grand Design Momentum 351m 7K Axles?
- Q&A: Recommended Replacement Brake Hubs and Brakes for a Dexter 7K Axle
- Q&A: Replacement Hub Assembly For EZ Loader Trailer Hub 300-020883
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Most Popular Wheel Bearings
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer

