Dimension and Weight Capacity of etrailer.com Side Mount Weld-On Jack

Updated 02/25/2016 | Published 02/24/2016

Products Featured in This Question

Square Pipe Mount Swivel Trailer Jack w/ Foot - Drop Leg - Sidewind - 15" Lift - 7,000 lbs

(195)

$142.75

Square Direct Weld Trailer Jack w/ Footplate - Drop Leg - Topwind - 15-1/4" Lift - 7,000 lbs

(218)

$67.54

Question:

Hello, Can you tell me the crank to mount measurement? Is there a top crank version of this jack? Is there a warranty? Thanks,

asked by: Tim

Expert Reply:

The measurement of the jack you asked about # TJDP-7000S-B measures from crank to center of the pipe mount is 8-1/2 inches. The lift capacity of this jack is 7,000lbs and static support capacity is 8,000lbs. When using jacks like these, you are typically, only lifting the tongue weight (which is 10-15 percent of your total trailer weight) of the trailer so the higher rated ones will allow the jack's gears to work without strain.

For a very similar top crank direct weld-on jack the etrailer jack # TJD-7000 will give you the 7K weight capacity as well as 15-1/4 inches of travel.

I was also able to find out that both of these jacks will have a 1 year limited warranty.

expert reply by: Jackie C