What is the Depth of the Hubs in Kodiak Disc Brake Kit K2HR2D
Published 01/13/2016
Question:
Hello, Can you tell me the depth of the hub and rotor assembly? I need to see if it will fit my current trailer.
asked by: Brandon
0
Expert Reply:
On the Kodiak disc brake kit for 2,000 pound axles # K2HR2D it measures 3.45 inches from the hub face to the brake mounting flange. Compare that to the hubs you have now to determine if the disc brakes will make the wheels further from the trailer. I have included a picture as well showing some other dimensions.
expert reply by:
Michael H
0
click to enlarge
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 2,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 2000 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Brakes, Hub and Drum Assembly with L44649 Inner and Outer Bearings on 2000lbs Axle
- Article: Trailer Lighting Requirements
- Q&A: Adding Electric Brakes To 2,200lb Dexter Torsion Axles
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Installing 7-Way Trailer Connector on 2005 Ford E-150 Van
- Q&A: Troubleshooting Trailer Lights Remaining On After 2020 Chevrolet Silverado 1500 is Shut Off
- Q&A: Which Lug Nuts To Use on 17.5" Trailer Wheels
- Q&A: Is There a Brake System For a 3,500LB Axle Which Will Allow For 10 Wheels?