Can a Trailer with Axles Over Leaf Springs Be Lifted
Updated 11/26/2015 | Published 11/25/2015 >
Question:
I have a 2003 34 foot keystone sprinter fifth wheel trailer. The axles are already flipped but it doesnt fit on my 8inch lifted chevy silverado 2500hd with 37inch tires and 20inch rims. What tandom axle hanger kit would I need to get to bring my fifth wheel up to height so that it doesnt hit the railing of my truck bed. Thanks.
asked by: Josh
Expert Reply:
If your axles are already above the leaf springs the only way to increase the height of the trailer is to install taller hangers. You should note that this route isn't going to give you a dramatic lift.
The biggest issue your setup has is the tall rims and tires on your trailer. Normally trucks with lifts or large wheels can't tow fifth wheel trailers easily.
If you are within a couple inches of being able to tow your trailer level without overhang/bed rail interference you could go with taller hangers. I attached a link that will take you to our trailer suspension page. You will need to select hangers from the filters to see what would work.
Product Page this Question was Asked From
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 3-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Choose Correct Equalizer Upgrade For Heartland RV 5th Wheel
- Q&A: Option to Replace Equa-Flex Equalizers on Grand Design Reflection
- Shop: Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K
- Shop: Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5K to 8K - Greasable Pivot
- Shop: Lippert Tandem Axle Equa-Flex AP Kit - Wet Bolts - 3-1/8" Long Shackles
- Search Results: trailer air ride suspension
- Search Results: suspension hangers
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How Can I Get Replacement Parts For B&W Companion 5th Wheel Hitch?
- Q&A: Roadmaster Comfort Ride Leaf Spring Suspension Kit for CrossRoads Elevation TF3612
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Dimensions of the Roadmaster Comfort Ride Slipper Spring System
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Article: How to Raise Your Travel Trailer Height
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Where to Position the Trailer Axle?
- Article: Determining Trailer Tongue Weight

