Can Pack'Em # PK-6S Trimmer Rack Be Installed to 2 Inch Square Tubing
Updated 11/23/2015 | Published 11/22/2015
Question:
will PK 65 attach to square tube rails appx 2 inch if so what do I do or is there a rack for square tube
asked by: John M
0
Expert Reply:
The Pack'Em # PK-6S trimmer rack can indeed be installed on a piece of 2 inch square tube stock. You'd simply through-bolt downwards through the entire width of the tubing. You'd need to use 3/8 inch grade 8 bolts that are at least 2-1/2 inches long. The hardware isn't included, so you'd need to source that locally.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Pack'Em Trimmer Rack for Utility Trailers - Qty 1
- Trimmer Racks
- Utility Trailer
- 1 Trimmer
- Drilling Required
- Locks Included
- PackEm
more information >
Continue Researching
- Q&A: Folding Trailer Ramp Add-On Kit For 6 Foot Wide Trailer To Haul Lawn Tractor And Car
- Q&A: 7 Inch Monitor to Replace AOM713WP Monitor on Voyager RV Observation Camera System
- Article: How to Measure a Trailer Axle
- Q&A: Recommended Wheel for ST225/75R15 Goodyear Endurance Tire on a 6,000 lb Travel Trailer
- Q&A: 15 inch Galvanized Trailer Wheel Recommendation with 6 Lug Bolt Pattern
- Q&A: Recommended Gooseneck Hitch Option for Cab and Chassis Ford F-450
- Q&A: Best Way to Drill Holes Through the Curt Gooseneck Flat Plate Part # C65500
- Article: Trailer Wiring Diagrams
- Q&A: Direct Replacement for Carrier Air V RV Air Conditioner
- Article: Trailer Hitch Balls
- Article: Double-Eye Trailer Suspension System Review
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule