How to Determine if 2015 Kia Sorento EX Has Factory Tow Prep Package
Updated 09/01/2015 | Published 08/31/2015 >
Products Featured in This Question
Question:
I have a 2015 Sorento EX. How do I determine if the car has a factory tow prep package or not. i did not buy the car new so I dont have a window sticker...You can reply to me at my email address...Thanks.
asked by: Robert S
Expert Reply:
The easiest way to determine if your 2015 Kia Sorento EX has the tow package would be to call your dealer's service department and have them run the VIN of your vehicle. They may even be able to send/email you a print out so you know exactly how your Sorento is equipped.
When it comes to a hitch for your vehicle I recommend going with the Curt Class III Trailer Hitch, # C13152. This hitch will fit all models of the 2015 Sorento and installs with no welding or drilling required.
If you were planning to do a bit of towing, the trailer wiring harness is going to be where tow package/no tow package will be important. If you find that you do have the tow package, you will use part # C56332 or if you don't, use part # C56256. I've linked you to the installation instructions and install videos for the hitch and the two wiring harnesses.
In addition to the hitch and wiring you will also need a ball mount and hitch ball to complete the set-up. Take a look at the etrailer ball mount kit # 989900. This comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, I have also included a link to additional ball mount options for you.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Mounting Bracket 4-Pole Flat
- Q&A: Best Way To Add Brake Controller To 2017 Hyundai Santa Fe With Aftermarket 4-Pin
- Q&A: Recommended Wiring Harness For A 2015 Kia Sorento LX Without Factory Tow Package
- Q&A: How To Determine If a 2018 Hyundai Santa Fe Limited has the Factory Tow Package
- Q&A: Which Trailer Wiring Harness for 2013 Hyundai Santa Fe
- Q&A: How Do I Tell if My Hyundai Santa Fe Has a Tow Package?
- Q&A: Recommended Trailer Hitch for a 2017 Hyundai Santa Fe
- Article: Trailer Wiring Diagrams
- Article: Best Bike Racks for Electric Bikes
- Q&A: B&W Companion Pivot Arm Lube Recommendation
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Article: Which Hitches are Made in the USA
- Article: Rolling on a Budget: Top Wallet-Friendly Platform Bike Racks




