Rubber Lube Plugs Needed for Triton Boat Trailer

Updated 08/25/2015 | Published 08/24/2015

Products Featured in This Question

Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1

(217)

$5.72

Grease Cap Plug for E-Z Lube Grease Caps - Qty 2

(1485)

$5.17

Question:

I have what I believe to be EZ lube hubs on my triton boat trailer. Here recently I have noticed that the hubs are slinging grease all over my wheels. Im sure its time to service and repack the bearing but I noticed that the EZ rubber plugs have cracks around the inside indent where the little nipple is. I pulled one of the plugs and measured across it and the diameter is roughly 1.5 inch with TRP raised letters on the outside edge. I see that you have replacement plugs but are listed as 1.18inch plugs. Do they make 1.5inch replacement plugs?

asked by: Jeff W

Expert Reply:

Part # DC-RP for a single plug and # RG04-010 for a pair may actually be what you need. Instead of measuring the outer diameter of the grease plug itself, you will want to measure the dust cap hole. If this measures 1.18 inches then this is the correct plug for you.

expert reply by: Leah S