Installation Of Curt T-Connector Vehicle Wiring Harness On 2002 Dodge Ram Pickup

Updated 08/18/2015 | Published 08/17/2015

Question:

I am about to purchase the taillight harnesses, #C55504 assembly. Can you please provided some pictures detailing the installation? I am not a handyman or knowledgeble person so instruction for dummy is welcome here. Thank you in advance.

asked by: DC D

Expert Reply:

The installation of the Curt T-Connector Vehicle Wiring Harness, part # C55504 is really easy and I am sure you will have no problem.

You will need to locate the wiring harness under the truck on both the driver and passenger side. They will have connectors that look similar to the connectors on the # C55504. Just separate the connectors on your truck being careful not to break the locking tabs and connect the wiring harness connectors as described in the included instructions.

You will then need to find a suitable mounting location for the white ground wire that has the eyelet attached. Make sure the location is a clean metal surface.

You then adhere the black converter box using the included double-sided tape. Make sure all of the wires are not making contact with any sharp objects and they are not near the exhaust pipes. The included instructions show the areas where you will find the connection points for the harness.

expert reply by: Jeffrey L