Does Routing of Air Line Point Up or Down When Installing Air Lift kit AL60815

Updated 07/14/2015 | Published 07/13/2015

Question:

I installed the AL60815 AirLift 1000 helper air bags on my 2007 Honda Odyssey, but had trouble routing the tubing. Several photos on your website appear to show the air bags installed on Odysseys without the stem and tubing protruding through the hole in the bottom of the rear lower control arm reference attached photo from your website for a 2011 Odyssey. I cant figure out how to do this - it seems like the stem and tubing have to route through the lower hole to avoid getting pinched during normal operation. Im concerned because now the tubing hangs below the control arm and could get snagged on road debris and snow. Any suggestions?

asked by: Ben S

Expert Reply:

When you install the # AL60815 in your 2007 Honda Odyssey you would want the air line to point down like you referenced. It's hard to see in the install picture that you referenced but it is installed pointing down. You will want to use zip ties to secure the line away from moving or hot parts.

If you check out the install video that I attached you see how we installed this kit on a similar Odyssey.

expert reply by: Jameson C