Trailer Hitch and Weight Distribution for a 2011 BMW X5 35d
Updated 07/09/2015 | Published 07/07/2015 >
Products Featured in This Question
Question:
Hi, Im in the process of purchasing a 2011 BMW X5 35d as my new tow vehicle. I have a 21foot tt with a gross weight of 5500 lbs and a dry tongue weight of 390 lbs which is under the limit of this hitch. Im wondering if I will require a weight distribution setup or not. Can I use a weight distribution setup with this hitch?
asked by: Chad P
Expert Reply:
Draw-Tite trailer hitch # 75600 is rated for use with weight distribution. I tried to find towing capacity and information in the 2011 BMW X5 owners manual but could not (because it isn't listed). You can check the sticker in the door jamb to confirm but I did find a listed capacity of 6,000 pounds gross trailer weight through another resource.
To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle.
Trailer tongue weight is typically 10 to 15 percent of the gross trailer weight. So for a 5,500 pound trailer that would be 550 to 825. But you are limited to 600 pounds tongue weight for the hitch and the vehicle.
To cover 550 to 825 pound range I recommend the Strait-Line system # RP66083. It comes with dual-cam sway control and is rated for 400 to 800 pounds tongue weight. The dual-cam sway control is recommended because it stops sway before it starts.
For a 2 inch ball use # A-90 and for a 2-5/16 inch ball use # 19286. I have included some helpful links on weight distribution and determining tongue weight for you.
To add a 4-Way trailer connector use # 119250KIT. I have linked a video showing how the wiring harness and the hitch install on a 2013 X5.
Featured Help Information
Miscellaneous Media





Continue Researching
- Search Results: equalizer 4 point
- Shop: Andersen Weight Distribution System w/ Sway Control - 4" Drop - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Andersen Weight Distribution Hitch w Sway Control - 4" Drop/Rise - 16K GTW, 1.6K TW
- Shop: Brake Controller
- Q&A: Can I Use a 4 Way Vehicle Connector with 7 Way Adapter and the Curt Echo Brake Controller?
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Video: How to Choose a Trailer Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Search Results: trailer wiring
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Availability of 2-5/16" Ball for Andersen Weight Distribution Hitch
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Search Results: brake controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern